User manual VIEWSONIC PJL9371

[. . . ] ViewSonic PJL9371 XGA LCD Projector ® - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - - () - () - Model No. : VS12680 Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] Using the / cursor buttons turns on/off the built-in speaker. SPEAKER ON ó OFF When the OFF is selected, the built-in speaker does not work. The combination of a picture and audio input port can be arranged in the menu. The audio coming into the port selected in the (2) is output while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using the / cursor buttons. COMPUTER IN1 ó COMPUTER IN2 AUDIO OUT STANDBY COMPONENT VIDEO ó S-VIDEO ó (Y, Cb/Pb, Cr/Pr) AUDIO SOURCE · Choose the AUDIO OUT STANDBY, to select the audio output to the AUDIO OUT ports in the standby state. The built-in speaker does not work in the standby state. · While the RETURN is selected, pressing the cursor (or the ENTER) button returns to the previous menu. (2) Select one of the AUDIO IN ports using the / cursor buttons. AUDIO IN1 ó AUDIO IN2 ó AUDIO IN3 ó · disables the audio output. (Closed Caption) is automatically activated when is selected and an input signal containing C. C. This function is available only when the signal is NTSC for the VIDEO or the S-VIDEO, or 480i@60 for the COMPONENT, the COMPUTER IN1 or the COMPUTER IN2, and when the AUTO is selected for the DISPLAY in the C. C. menu under the SCREEN menu. ViewSonic 36 PJL9371 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the / cursor buttons, and press the cursor (or the ENTER) button to execute the item. Then perform it according to the following table. Item Description Using the /// cursor buttons switches the OSD (On Screen Display) language. ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL. . . (shown in the LANGUAGE dialog) LANGUAGE Press the ENTER (or the INPUT) button to save the language setting. MENU POSITION Using the /// cursor buttons adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds. Using the / cursor buttons switches the mode for the blank screen. The blank screen is a screen for the temporarily blanking feature. It is displayed by pressing the BLANK button on the remote control. MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK BLANK MyScreen : Screen can be registered by the MyScreen item. ORIGINAL : Screen preset as the standard screen. BLUE, WHITE, BLACK : Plain screens in each color. [. . . ] Take or ship the product in the original container packaging to an authorized ViewSonic service center. Round trip transportation costs for in-warranty products will be paid by ViewSonic. Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. [. . . ]