User manual VIEWSONIC VIEWPAD 10PRO

[. . . ] VS14140 Compliance Information CE Conformity for European Countries The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. R&TTE Compliance Statement 2200 This wireless module device complies with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the following conformance standards: EN 301 489 EN 301 489 EN50361 EN301448 EN301908 EN301489 EN300328 EN62311 Caution Risk of explosion if battery replaced aced by an incorrect type. Dispose of used batteries according to the instructions. Notified Countries: Germany, UK, Netherlands, Belgium, Sweden, Denmark, Finland, France, Italy, Spain, Austria, Ireland, Portugal, Greece, Luxembourg, Estonia, Latvia, Lithuania, Czech Republic, Slovakia, Slovenia, Hungary, Poland and Malta. Following information is only for EU-member states: The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). [. . . ] 2-11 Battery, Sub-Menu Low Battery Warning Level Setting: Set the slide-bar for low battery level. Gather battery usage data for battery time calculation. 9 Display Provide display information and adjustments. Fig. 2-12 Display, Sub-Menu Tap to manually enable external video output (If plug & play is not detected). Power Management Power management options. 10 Device Controller Fig. 2-13 Device Controller, Sub-Menu Wireless Card: Tap to enable/disable WiFi. Bluetooth: Tap to enable/disable Bluetooth. G-Sensor: Tap to enable/disable G-Sensor. Light Sensor: Tap to enable/disable Light Sensor. Adjust display brightness automatically based on room ambient light condition. 11 Chapter 3: Basic Operation Power up and off 1. Press on button located at top of device to power up. Warning: Do not turn off the device before it is fully booted or it may cause an error on the next power up. In Windows 7, click Start>Shutdown> or push the button to power off. Note 1: Windows can be configured to automatically shut down by single press. Please use Windows help & support (Keyword "Power") for more power configuration information. Note 2: Hard power off can be achieved by holding down for >4 second. Touch Screen Control Tap: Quick single tap motion. Emulates left mouse click. Tap & Hold: Press on open area for >4 seconds. Emulates right mouse click. Slide: Quick directional motion. Emulates scrolling. Drag: Press on icon for >4 seconds then perform directional motion. Emulates left mouse button hold. Pinch: Two-points inward motion. Zoom in. Spread: Two-points outward motion. Zoom out. Note: An application can defines more complex hand gestures, availability based on application support. 12 Virtual Keyboard Virtual keyboard is located at upper left corner of Windows desktop. Drag the virtual keyboard to center of Windows desktop for keyboard input. Fig. 3-1 Virtual Keyboard in Desktop Virtual keyboard icon will also pop up when enter text input section. [. . . ] Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. Repair or attempted repair by anyone not authorized by ViewSonic. Causes external to the product, such as electric power fluctuations or failure. [. . . ]