User manual VISA VE-2PT

[. . . ] Pack contents: 1) 2 x self-tapping screws (48mm) 2) 2 x wall anchors (7, 5mm) 3) M4 x bolts (12mm) 4) M4 x bolts (30mm) 5) 4 x spacers (1. 9mm) 6) 1 x Allen key PLEASE NOTE: Study the following instructions and assembly diagrams with care prior to installing and using the mount. [. . . ] We recommend you use a qualified installer to mount the product on walls made of other material. The product is not suitable for use outdoors B) Place the mount platform on the wall in the desired position holding the part with the hook from below and laying it plumb using the spirit level provided. C) Mark the two holes to be made on the wall. STEP 2 ­ Mounting the arm on the LCD rear panel Important: NEVER mount the product with the LCD monitor plugged in and/or with the screen faced downwards to avoid damaging the screen surface. Examine the rear of the LCD monitor: - if the surface is flat, mount the arm using the 12mm bolts (3); - otherwise use the larger bolts (4) and spacers (5). warning: Avoid over-tightening the bolts. STEP 3 ­ Final mounting To complete installation: - Insert the arm with the mounted LCD monitor into the groove on the platform; - When the arm is completely inserted, you will hear a click which indicates that is has been safely mounted. note: to remove the arm , press on the plug and slide the arm upwards. Adjustment: The angle of vertical inclination ( Tilt ) can be adjusted on most models by using the knob placed behind where the monitor is mounted: Unscrew by turning the knob anticlockwise, adjust the inclination and tighten the knob to secure the new position. Other adjustments can be made with regard to vision by moving the arm into the desired position. [. . . ] The Manufacturer is the sole authority for this warranty, no others are allowed to interpret any liabilities before and after sales of this product. This limited warranty only extends to the first original purchaser for 5 years . [. . . ]