User manual VISIONEER 9520 INSTALLATION GUIDE

[. . . ] Visioneer ® OneTouch 9520 Photo Scanner User's Guide for Windows Visioneer OneTouch 9520 Photo Scanner User's Guide FOR WINDOWS COPYRIGHT INFORMATION Copyright © 2006 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of Nuance Communications, Inc. [. . . ] Four boxes appear for negatives (as shown here), and three for 35mm slides. Click on a box to select it. The selection boxes are also represented by the tabs here on the Scan Info box. Click on a tab to see the information about a selected image. See "The Scan Info Box" on page 58 for details. 66 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER'S GUIDE 6. From the list on the left side of the interface, select the scan configuration for the images. Note that as you select different configurations, the images change based on the selection. For example, if you select Grey Scale, the images will be in shades of grey. Similarly, select a configuration for vivid colors and the image colors will be deeper and more intense. Click an icon to select a configuration--Color or Grey Scale. Clicking the "+" sign shows details of the scan settings. 7. Use the selection boxes to select the image to scan, crop an image, or remove it from scanning. Move the selection box--You may need to move a selection box to fit exactly over the image you want to scan. For example, if you only have three negatives in a film strip, the boxes will not be aligned directly on the images and you will need to move them. SCANNING 35MM SLIDES AND NEGATIVES 67 To move a selection box, put the pointer in the box. The pointer becomes a four-headed drag arrow. Press and hold down the mouse button and drag the box so it fits exactly over the image. This example shows a selection box not aligned directly over the image. The pointer becomes a four-headed arrow. Press and hold down the mouse button then drag the box to its correct position. This shows the box now positioned correctly over the image. Crop an Image--You can crop an image so only a portion of the image is scanned. To crop the image, put the pointer on one of the box edges. Press and hold down the mouse button and drag the edge to crop the image. When the image is scanned, only the cropped section is scanned. Put the pointer on an edge. Press and hold down the mouse button then drag the edge to crop the image. 68 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER'S GUIDE Remove an image from scanning--You may want to only scan one negative in a filmstrip. In that case, you remove selection boxes around the other images. To remove a selection box, select it by either clicking in it or clicking its tab on the Scan Info box, then click the Remove button on the Scan Info box. To remove a selection box, select it by clicking on it or clicking its tab, then click the Remove button. 8. You can also adjust the image quality and select new TWAIN settings. [. . . ] A likely cause is that some driver programs are already installed on your computer for another scanner. They are interfering with the installation and OneTouch options, and you need to remove those other drivers and re-install your Visioneer 9520 Photo scanner. Please see the documentation that you received with the other scanner for the steps to remove its driver programs. You can also use the basic steps in the section "How to Uninstall Your Scanner" on page 134, but in Step 3, instead of uninstalling OneTouch 4. 0, uninstall the other scanner's driver programs. [. . . ]