User manual VISIONEER PATRIOT 680

[. . . ] Visioneer® Patriot 680 Scanner User's Guide for Windows Visioneer Patriot 680 Scanner User's Guide FOR WINDOWS COPYRIGHT INFORMATION Copyright © 2006 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of Nuance Communications, Inc. [. . . ] Click the name of the units, inches or millimeters, to toggle between them. Improvements and Settings--Only the options that apply to the selected Destination Application are available. Reduce Moire Patterns--Moire patterns are wavy, rippled lines that sometimes appear on the scanned images of photographs or illustrations, particularly newspaper and magazine illustrations. Selecting Reduce Moire Patterns will limit or eliminate moire patterns in the scanned image. This option is only available for the Grayscale or Color Mode at 300 dpi or less. CONFIGURING THE ONETOUCH BUTTONS 67 Invert Image--Only available for Black&White Mode, this option reverses the black and whites of an image. Original Image Inverted Image Duplex--Scan both sides of the page. If this option is not selected, the scanner will scan the front side of the page only. Note: Because you can set Duplex and Simplex for the OneTouch buttons, there could be a conflict when you press the Simplex or Duplex button on the scanner. Regardless of the OneTouch setting, the scanner button always takes precedence. In other words, even if the LED number on the scanner has a setting for Duplex, when you press the Simplex scanner button the scanner scans in Simplex mode, and vice versa. Skip Blank Originals--Skips pages that are completely blank. Typically you use this option when you will scan a stack of twosided pages which have a number of blank sides. This option is only available for Duplex scanning. 68 VISIONEER PATRIOT 680 SCANNER USER'S GUIDE Color Filter--Color filter is the ability of your scanner to automatically remove a color from a scanned item. For example, if you are scanning a letter with a red watermark, you can choose to filter out the red so the scanned letter just shows the text and not the red watermark. Color filter applies to Black&White or Grayscale Mode. The original with a red watermark over black text. The scanned item with the red filtered out. 8. The options of the Advanced Settings tab are for the Color or Grayscale scanning mode. 9. Drag the sliders to the left and right to change the color settings. As you do, the image changes to show the effects of the new settings. Saturation is the strength or purity of a color, hue is the color your eyes see as reflected from the image, and gamma controls the brightness of the midtones of the color. CONFIGURING THE ONETOUCH BUTTONS 69 10. It will now be listed in the list of Scan Configurations on the OneTouch Properties window for the appropriate Destination Applications. THE DEVICE SETTINGS TAB A Device Settings tab is on the Scan Configurations dialog box when your selected Destination Application sends the scanned image to a printer, fax application, or other device. You use the options on the Device Settings tab to select settings for the device. Click on the Device Settings tab. Fit to page, reduce image if necessary--If the scanned image is too big to be printed or faxed on a single page, the image will automatically be reduced to fit the page. [. . . ] After uninstalling the other scanner's driver programs, uninstall OneTouch 4. 0 using the steps on page 143, then reinstall it using the steps on page 9. 142 VISIONEER PATRIOT 680 SCANNER USER'S GUIDE STATUS LIGHT TROUBLESHOOTING CODES A green status light indicates the normal state of the scanner. Normal Operation Blinking green: indicates the scanner is waking up from power saving and preparing to scan. Steady green: indicates the scanner is ready to scan. Error Codes If your scanner experiences hardware problems, the status light will blink red, and the LED flashes an "E" and the error code number. The LED blinks back and forth between "E" and the error code number (such as 4). The red light flashes the number of times as the error code (4 in this example). The following table describes the error codes. Error Code 4 Problem Description Paper jam Solution Open the ADF cover and remove the jammed page. See "Clearing Paper Jams" on page 137 for details. [. . . ]