User manual VISIONEER PHOTOPORT 7700 INSTALLATION GUIDE

[. . . ] Visioneer® PhotoPort® 7700 USB Scanner Installation Guide COPYRIGHT INFORMATION Copyright © 2001 Visioneer, Inc. , a wholly owned subsidiary of Primax Electronics LTD. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo, and PhotoPort are registered trademarks of Primax Electronics LTD. OneTouch is a trademark of Primax Electronics LTD. [. . . ] If you want to scan an item on the scanner glass without closing the PhotoPort Reader, click Do Scan. To crop and image before sending it to the destination application: 1. Cropping on the PhotoPort Reader is similar to the cropping described on page 29, except you can crop to any length-to-width size. Crop the image and click Apply. 35 VISIONEER PHOTOPORT 7700 USB SCANNER INSTALLATION GUIDE CONFIGURING THE SCANNER To configure the scanner, display the Configuration dialog box and then select options for the scan buttons. You display the Configuration dialog box from either the shortcut menu or the Button Panel. To display the Configuration dialog box from the shortcut menu: 1. Right-click the scanner icon. Scanner icon The shortcut menu appears. Choose Configure on the shortcut menu. The Configuration dialog box appears. Click the tab that corresponds to the button you want to configure. To display the Configuration dialog box from the Button Panel: 1. Right-click the button you want to configure. The Configuration dialog box appears. The tab for the scanner button you clicked is selected for you. CONFIGURING THE SCANNER 36 ABOUT THE CONFIGURATION DIALOG BOX The Configuration dialog box shows the current settings for each scanner button. The tabs across the top of the dialog box correspond to the buttons. Clicking a tab shows the current settings for the corresponding button on the scanner. For example, the following figure shows the current settings for the Scan button because the Scan tab is selected. The Scan button is set up to scan the item with the configuration named Scan Document (OCR Quality), and then after the scanning is finished, to open the PaperPort Desktop to display the scanned image. The Format and Page(s) setting is to scan as a bitmap for a single page item. Select a software application to send the scanned image to that application. Select a setting for scanning the item. Select format and page(s) options for the button. See "Setting Preferences" on page 44 to set Preferences. The options on the Configuration dialog box are: Select Destination--the list of applications that can open to display the scanned image. Select the application that you want to automatically open to display or process the scanned image. 37 VISIONEER PHOTOPORT 7700 USB SCANNER INSTALLATION GUIDE Select Configuration--the list of the button's scan configurations. The configuration settings include: color, black and white, or grayscale, resolution in dots per inch (dpi), page size, brightness, and contrast. To see the details about a configuration, click its icon in the list. [. . . ] Select Show Full Image from the pop-up menu that appears. SETTING PREFERENCES You can set preferences for the Scan Manager Pro and scanner that are independent of the preferences for the PaperPort software. 67 VISIONEER PHOTOPORT 7700 USB SCANNER INSTALLATION GUIDE To set the Scan Manager Pro preferences: 1. The User Preferences dialog box appears. 2. Select the preferences you want: s Enable selection of color bitdepths. . . --your PhotoPort 7700 scanner supports a tremendous range of colors, but other devices (called the TWAIN clients), such as older cameras that you can use with the Scan Manager Pro support only a 24-bit depth range of colors. Select this option to automatically allow the Scan Manager Pro's color settings to support more than a 24-bit depth if the other devices also support the greater range of colors. [. . . ]