User manual VISIONEER STROBE XP 200 INSTALLATION GUIDE

[. . . ] Visioneer Strobe XP 200 USB Scanner Installation Guide FOR WINDOWS COPYRIGHT INFORMATION Copyright © 2003 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. [. . . ] The higher the dpi setting, the sharper and clearer the scanned image. However, higher dpi settings take longer to scan and produce larger files for the scanned images. Brightness and Contrast--Drag the sliders to the right or left to adjust the brightness and contrast of the scanned image. The Contrast setting does not apply to the Black/White mode. Click the Page Settings tab to select page settings. Straighten--This option automatically straightens the scanned image. This option overrides the AutoCrop option. AutoCrop--This option lets the scanner automatically determine the size of the item being scanned. For example, if you scan an unusual page size, the scanner will automatically determine the size of the page. CONFIGURING THE AUTOSCAN FEATURE 21 DeScreen--Select this option when scanning a picture from a newspaper or magazine article, or other items that contain images with patterns or dots. These patterns and dots sometimes cause a wavy appearance for which the Descreen option can compensate. The following example shows the effect of descreening a scanned image from a magazine article. Original Image Descreened Image The scanning may slow down a bit when descreen is selected. The DeScreen setting does not apply to the Black/White mode and is available when scanning from Windows 98, 2000, and Me operating systems. To set the new configuration for use by the AutoScan feature, select the configuration and then click OK. EDITING AUTOSCAN CONFIGURATIONS You cannot edit the preset configurations; you can only edit those configurations that you created yourself. Select the configuration you want to edit. The selection must be one of the configurations you created. The Edit Scan Configuration dialog box opens. 22 VISIONEER STROBE XP 200 SCANNER INSTALLATION GUIDE 4. Edit the settings as required and click OK. Click OK to close the Configuration dialog box. SETTING PREFERENCES You can set preferences for the Select Destination list and whether or not to display a Scan Progress window. The settings apply to the configurations you select for the AutoScan feature. Open the Configuration dialog box and click the Preferences tab. Preferences tab CONFIGURING THE AUTOSCAN FEATURE 23 2. On the OneTouch Preferences dialog box, select desired preferences as described below. Show All Destinations--Select this option to automatically select all the destination application categories. The list of destination applications on the Configuration dialog box will include all the applications on your computer that fall into these categories. [. . . ] On the Perform Uninstall window, click Finish. The Visioneer OneTouch software is uninstalled from your computer. If the Remove Shared Components window opens, Visioneer recommends selecting No to All. Unplug the USB cable from your computer and scanner. [. . . ]