User manual VISIONEER XP100

[. . . ] Visioneer Strobe XP 100 Scanner Installation Guide FOR WINDOWS COPYRIGHT INFORMATION Copyright © 2002 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. [. . . ] The following example shows the effect of descreening a scanned image from a magazine article. Original Image Descreened Image The scanning may slow down a bit when descreen is selected. You don't need to select this option when scanning photographs. The DeScreen setting does not apply to the Black/White mode. Gamma--The gamma setting adjusts the range of midtone colors on an image. By changing the gamma you can adjust midtone levels without losing details from the lightest or darkest areas. You use the gamma correction to achieve precise color matching of the original image and how it looks on your computer monitor. Because the computer cannot always transmit the exact color information to the hardware, you may have to make some color adjustments using the gamma feature. In most cases, however, the default gamma setting works fine and normally does not need to be adjusted. Now you can select your new configuration for the scanner button. Select your new configuration in the Configuration list. Click OK on the Configuration dialog box. The new configuration and its settings now apply to the button. CONFIGURING THE SCANNER BUTTON 23 EDITING YOUR SCANNER'S BUTTON CONFIGURATIONS You cannot edit the preset configurations; you can only edit the scanner button configurations that you created yourself. Select the configuration that you want to edit. It must be one of the configurations you created. You cannot edit the preset button configurations. This example shows a configuration that you would have created earlier named Special Scan for Dark Print. 3. The dialog box with the Scan Settings and Page Settings appears. Edit the settings that you want and click OK. 24 VISIONEER STROBE XP 100 SCANNER INSTALLATION GUIDE SETTING PREFERENCES The preferences remain the same for each configuration that you select for the scanner button. Click the Preferences tab on the Configuration dialog box. Preferences tab The Preferences dialog box appears. 2. Select the preferences for the OneTouch software. Show All Destinations--Clicking this option automatically selects all the destination applications categories. The list of destination applications on the Configuration dialog box will include all the applications on your computer that fall into these categories. [. . . ] Double-click the Add/Remove Programs icon. Windows 98, 98SE, or ME: The Add/Remove Programs Properties window opens. Make sure the Install/Uninstall tab is selected. Windows 2000 or XP: The Add or Remove Programs window opens. [. . . ]