User manual VISIONEER XP470

[. . . ] Visioneer® Strobe XP 470 USB Scanner User's Guide for Windows Visioneer Strobe XP 470 USB Scanner User's Guide FOR WINDOWS COPYRIGHT INFORMATION Copyright © 2005 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. [. . . ] Color filter applies to Black&White or Grayscale Mode. The original with a red watermark over black text. The scanned item with the red filtered out. 8. The options of the Advanced Settings tab are for the Color or Grayscale scanning mode. Saturation is the strength or purity of a color, hue is the color your eyes see as reflected from the image, and gamma controls the brightness of the midtones of the color. 9. Drag the sliders to the left and right to change the color settings. As you do, the image changes to show the effects of the new settings. 64 VISIONEER STROBE XP 470 SCANNER USER'S GUIDE 10. It will now appear in the list of Scan Configurations on the OneTouch Properties window for the appropriate Destination applications. THE DEVICE SETTINGS TAB A Device Settings tab appears on the Scan Configurations dialog box when your selected Destination Application sends the scanned image to a printer, fax application, or other device. You use the options on the Device Settings tab to select settings for the device. Click on the Device Settings tab. Fit to page, reduce image if necessary--If the scanned image is too big to be printed or faxed on a single page, the image will automatically be reduced to fit the page. Actual size, crop image if necessary--If the scanned image is to big to be printed or faxed on a single page, the image will automatically be cropped around its edges to fit on the page. Center image on page--The image will be printed in the center of the page instead of at the top right corner. CONFIGURING THE ONETOUCH BUTTONS 65 Maintain aspect ratio--The aspect ratio is the length-to-width relationship of the image's dimensions. Select this option so the image's relative proportions remain constant. AutoRotate image for best fit--If the image is a Landscape format and the device is printing in the Portrait mode, or vice versa, rotate the image to fit on the page. Collate copies--If you're printing more than one page, collate the copies. Enter the number of copies in the Copies box. Advanced--Click to see additional settings for the device. The dialog that appears is specific to the device. For example, if the device is your printer, the dialog box is your printer's setup settings. Click OK or Apply. THE STORAGE OPTIONS TAB (ARCHIVE) A Storage Options tab appears on the Scan Configurations dialog box when the selected Destination Application is set as Transfer to Storage. You use the options on this tab to select where you want to save your scanned items for storage when scanning with that particular Scan Configuration. Button 7 is set as the default Archive button for scanning to storage, with Transfer to Storage as the destination. So if you want to have the Scan Configuration apply to Button 7, switch to it first before creating the new Scan Configuration. [. . . ] Make sure the Change or Remove option is selected. Windows Me: Click the Add/Remove button. Windows 2000 or XP: Click the Change/Remove button. 6. From the list of programs, select OneTouch 4. 0. 7. [. . . ]