User manual VISONIC MKP 151

[. . . ] MKP-150, MKP-151 2-Way Wireless Keypad 1. INTRODUCTION NOTE: RELEVANT TO POWERMAX+ VERSION B AND ABOVE The MKP-150 / MKP-151 (different color) operates using two-way encrypted coded transmission and provides aural and visual indications. For each PowerMax+, PowerMax Pro, PowerMaxComplete, PowermaxExpress control panel, a maximum of two MKP-150/MKP-151 keypad devices may be enrolled. The MKP-150/151 includes an optional partition feature. [. . . ] The installer's menu is accessible only to those who know the installer's code, which is 9 9 9 9 by factory default. Press the next button () repeatedly until the display reads: INSTALLER MODE B. The display should read: ENTER CODE: ___ Note: For control panels with two installer codes, the default INSTALLER code is 8888 and the default MASTER INSTALLER code is 9999. The display will change to: SUPERVISION D. Press <> repeatedly to select one of the available options. Press <> to set the selected option. 5. 1. 2 To Activate the Recording Mode A. Upon gaining access to the installer menu (see section 5. 1. 1 A to C), the display will read "SUPERVISION". Press <>; RECORD SPEECH is displayed. The display will change to: USER TERM #1 Note: User Term refers to the name assigned to the recorded zone. Note: It is recommended to assign custom names that are identical to the custom names defined in the control panel. Press the key until this is displayed briefly: RECORD A MESSAGE Immediately thereafter, the display will change to: 5. 1. 1 To Set Supervision Time Make sure the system is not in Arm mode. TALK NOW 3 DE2462U E. Do not release the key and start talking immediately (for example, living room or library), while facing the front panel. The dark square boxes will slowly disappear one by one, from right to left. When the last one disappears (5 seconds later) the following message will be displayed: 5. 1. 4 Keypad Back Light RECORDING ENDED F. To check the message, press the key and listen to the playback. Upon gaining access to the installer menu (see section 5. 1. 1 points A to C) the display will read "SUPERVISION". Press <> repeatedly until BACK LIGHT is displayed. Press <> to select between OFF after 10s and always ON. Press <> to set the selected option. 5. 1. 5 Jam Detection A. Upon gaining access to the installer menu (see section 5. 1. 1 points A to C) the display will read "SUPERVISION". Press <> repeatedly until JAM DETECTION is displayed. Press <> to select between UL 20/20, EN 30/60, class 6 (30/60), disable and other. [. . . ] 1/08 WARRANTY Visonic Limited (the "Manufacturer") warrants this product only (the "Product") to the original purchaser only (the "Purchaser") against defective workmanship and materials under normal use of the Product for a period of twelve (12) months from the date of shipment by the Manufacturer. This Warranty is absolutely conditional upon the Product having been properly installed, maintained and operated under conditions of normal use in accordance with the Manufacturers recommended installation and operation instructions. Products which have become defective for any other reason, according to the Manufacturers discretion, such as improper installation, failure to follow recommended installation and operational instructions, neglect, willful damage, misuse or vandalism, accidental damage, alteration or tampering, or repair by anyone other than the manufacturer, are not covered by this Warranty. The Manufacturer does not represent that this Product may not be compromised and/or circumvented or that the Product will prevent any death and/or personal injury and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the Product will in all cases provide adequate warning or protection. [. . . ]