User manual VITEK MIGHTY DOME

[. . . ] 1) Remove the ball gimbal from its socket, and hold the base firmly with one hand. 2) Gently squeeze Point A and B and pull away from the base until the gimbal is removed from the base. 3) Replace the Gimbal cover by aligning the cover to the base and pressing down until it snaps back onto the base. 6 CONNECTIONS · Power connection: 12VDC and 24VAC dual input. · All Mighty Dome cameras come standard with a secondary video output. [. . . ] In such cases, find the optimal settings in CUSTOM setting of EXPOSURE menu" PRESET <NORMAL> INDOOR OUTDOOR Descriptions Produces an image that has average contrast and suitable for normal indoor or low-contrast outdoor scenes. Provides better leveling of image for in the darker areas of the scene. Suitable for indoor scenes that have higher contrast lighting. Optimized for outdoor sunlit applications and provides better leveling for the brighter areas. Suitable for outdoor scenes having high contrast between sunlit and shadows. Reduces the color rolling by fluorescent lights when line-lock is not available (NTSC). With AC24V supply for the best result against the color rolling if possible. Optimized for the common installation at lobby. Optimized for the common installation at warehouse FL-LIGHT LOBBY WAREHOUSE 17 Appendix: WDR Mighty Dome 4) EXPOSURE menu EXPOSURE menu is provided to help the settings with the possible parameters obtained and Presets are configured by factory tests for most commonly encountered environments. EXPOSURE presets may not be the best optimized settings for the actual installations. In such cases, find the optimal settings in CUSTOM setting of EXPOSURE menu EXPOSURE <WDR MID> WDR HIGH CUSTOM. . . WDR LOW 5) CUSTOM menu To enter CUSTOM menu, press Descriptions Medium level of the dynamic range control for each PRESET. If camera stay at NIGHT mode more than 10sec, increase EXIT THRES and repeat the fore mentioned steps. If the scene is too dim, it may not be returned to DAY. EXIT DELAY If set to ON, camera insert 8~10sec delay for NIGHT to DAY transition. This is to avoid the unnecessary transitions between NIGHT and DAY by the short duration of light such as car lights 20 Appendix: WDR Mighty Dome 10) SHUTTER LIMIT menu SHUTTER LIMIT <2X > ESS Descriptions The longest shutter is limited to 2X of 1/60(NTSC)/1/50(PAL) seconds when the scene illumination becomes dim. Video refresh rate at 2X ESS is 15(NTSC)/12. 5(PAL)frames/sec. The longest shutter is limited to 4X~32X of 1/60(NTSC)/1/50(PAL) sec when the scene illumination becomes dim. The higher integration increases the sensitivity but decreases the video refresh rate. 4X ESS ~ 32X ESS 11) WHITE BALANCE menu (in PICTURE CONTROL menu) To enter PICTURE CONTROL sub-menu, press WHITE BALANCE <ATW NORMAL> ATW Desat ATW Xtnd MANUAL button at PICTURE CONTROL of MENU-1. Descriptions White balance is compensated automatically in range of 2800K-7500K White balance is compensated automatically in range of 2000K-11000K. In the range of 2000-2800K and 7500-11000K, white balance is gradient-compensated. White balance is compensated automatically in range of 2000K-11000K White balance can be adjusted by either KELVIN or R/B. 21 Appendix: WDR Mighty Dome 12) MANUAL WHITE BALANCE menu (in PITURE CONTROL menu) To enter MANUAL WHITE BALANCE menu, press menu. button at <MANUAL. . . > of WHITE BALANCE View plain white paper or a gray card and adjust either KELVIN or R/B so that the color on the monitor becomes the most white. 13) BRIGHTNESS, DNR, SHARPNESS, FLIP, COLOR SELECT and SATURATION menus (in PITURE CONTROL menu) PICTURE CONTROL BRIGHTNESS DNR SHARPNESS FLIP COLOR SELECT SATURATION Descriptions BRIGHTNESS level is a kind of video output gain and is different from the iris level control. [. . . ] Line-lock for AC24V and Internal for DC12V 23 Appendix: WDR Mighty Dome 16) SAVE / RESTORE / EXIT menu MENU-2 SAVE AND EXIT EXIT NO CHANGES RESTORE FACTORY SETTINGS LANGUAGE VIDEO STANDARD Descriptions Exits menu after saving the parameters. Restores and saves all parameters of factory settings. Camera resets and restarts automatically. Language does NOT change by RESTORE FACTORY SETTINGS. [. . . ]