User manual VIVANCO FMH 6050 RF HEADPHONE SET

[. . . ] The AC adaptors are designed for these devices only. Do not use the supplied AC adaptors with other devices. Avoid exposure to extreme heat or strong light. Do not touch the contacts with metal objects. [. . . ] Disturbances could possibly be caused by other appliances or interference. You should then select a different frequency (A3) and repeat steps 4. Power supply unit for the transmitter (C) Connect the power supply lead to the socket (A5) provided on the back of the transmitter. Then plug the AC adapter into the mains socket. Connection to the audio source If your audio source is fitted with a jack socket (e. For headphones), use the audio lead provided (E). Connect one end of the lead to the headphones socket and the other to the audio input socket (A4) on the transmitter. If the jack plug is too small for the headphones socket, you can use the adapter (G) from 3. If your hi-fi or TV is not fitted with a headphones socket you can also use the phono output (AUX) by means of the Y adapter. Make sure that plug and socket colours are matched correctly (right = red, left = white). Audio cable) should not be longer than 3 metres. Now switch on your audio source (TV, hi-fi system, etc. ) , making sure that it is emitting an audio signal. When using adjustable headphone sockets, make sure that these are turned up high enough (roughly in the middle position). The FMH 6050 comes with 2 rechargeable batteries (of the Micro AAA type), to be charged before you use your new appliance for the first time. Prior to first operation, the batteries have to be charged during approximately 14 hours. After this initial charge, the batteries will remain fully charged for about 8 hours. Please note that the batteries will reach their full capacity, and thereby the operation time stated, only after the third charging operation. Useful hints on battery maintenance Perfect maintenance of your rechargeable batteries requires that you discharge / recharge them about once per month with an appropriate charger. for this purpose , we recommend chargers of the Vivanco product line. Regularly used, these appliances provide for longer useful life of your rechargeable batteries. The transmitter automatically switches itself off when there is no audio signal for a prolonged period or the input signal is too weak. [. . . ] If the audio signals are too weak the transmitter will otherwise switch off automatically. If these suggested solutions do not lead to the desired result, please contact your dealer. The FMH 6050 is subject to a strict quality inspection in order to guarantee maximum functionality. However, a technical defect can never be entirely ruled out. [. . . ]