User manual VIVANCO UR 850 LCD UNIVERSAL CONTROLLER

[. . . ] Adapting to devices In order to control your devices you must adapt or set the remote control to them. There are two ways of doing so: direct control code entry or code search. [. . . ] Instead of the TV device button, press another button, e. - You can interrupt code entry at any time by pressing EXIT. 1 Press and hold SET for 3 seconds, then set CONFIGURE with the or button. 3 Enter the time using the number buttons and confirm with the OK button. Then press EXIT several times to quit the setting mode. Set priority volume control With this function you can determine a device exclusively for volume control, e. Then the buttons VOL +, VOL ­ and always control the amplifier, regardless of which device you are controlling. Code search If the brand of your appliance is not in the list or none of the codes given fits, we recommend the automatic code search. Your remote control finds the correct control settings almost automatically in a few seconds: 1. For example, a program number appears in the display of your satellite receiver. 1 Press and hold SET for 3 seconds, then set CONFIGURE with the or button. 4 Then press EXIT several times to quit the setting mode. - You can cancel the priority setting using the same procedure. Locking or releasing device codes To prevent settings from being changed accidentally, proceed as follows: 1 Press and hold SET for 3 seconds, then set CONFIGURE with the or button. [. . . ] 1 Press and hold SET for 3 seconds, then set CONFIGURE with the or button. Operation You operate your appliances basically in exactly the same way as if you were using the original remote controls, except that you must first press a device button (TV, DVD, etc. [. . . ]