User manual VIVITAR DVR-390H

[. . . ] FCC STATEMENT This DVR-390H complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This DVR-390H may not cause harmful interference, and (2)This DVR-390H must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital DVR-390Hs, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Plug one end of the AV cable into the AV-OUT jack of the cradle. Connect the other end to the Audio and Video input jacks on your TV Monitor. It is important to note that the yellow RCA jack is the video signal and the other RCA jacks (usually red and black) are audio (left and right channels). Command the DVR-390H to play back still images or videos, as desired, as discussed in the previous sections. The method of playback operation is the same as playing back still images and video clips on the media player itself. Connecting the DVR-390H to a VCR or DVD recorder is similar. 28 Protecting Videos and Images You can protect your video clips and images from accidental deletion by selecting the Protect function in the Video or Image Playback modes. Follow these steps to protect an image or video. Use the Up/Down/Left/Right keys to select Video or Still-Image Playback mode. Press the Ok key to enter that playback mode. Press the Menu button to open the PLAY menu. Select Protect by using the Up/Down keys. Use the Right key to enter Protect submenu. Use the Up/Down keys to select "One image" (or "All images"), and then press the Right key to enter its submenu. To protect all images, select "All images" in this step. Select Lock by using the Up/Down keys, and then press Ok. Once the video clip/image is protected, the Protection icon will be displayed on each protected video and image. Canceling protection To cancel protection for an image or video clip, display the image or video for which you wish to remove the protection. Press the Ok key to confirm. 29 Deleting Videos and Images You may selectively delete any unprotected image or video from your DVR-390H. To delete videos or images from internal memory, remember to remove your SD memory card. Use the Up/Down/Left/Right keys to select Video or Still-Image Playback mode. Select the unwanted video or image by using the Up/Down/Left/Right keys. "Delete this?" appears on the image. [. . . ] Get your images ready and go explore this amazing program. To Install PhotoSuite: 1. Insert the CD-ROM packaged with the DVR-390H into the CD-ROM drive. Follow the on-screen instructions to complete the installation. Note: For information on how to use PhotoSuite to edit and retouch your recorded images, please refer to its online help. For Windows 2000/XP users, make sure to install and use the PhotoSuite while logged in as a user with an Administrator account. 53 INSTALLING Acrobat Reader The CD-ROM includes a PDF (portable document format) copy of the user's manual. [. . . ]