User manual VIVITAR VIVICAM 2655

[. . . ] Vivicam 2655 User Manual English 021015 Warranty Policy This camera is under warranty for one full year from the date of purchase by the orignal purchaser. In case of defects in materials or workmanship, we will replace or repair the camera free of charge. This warranty applies to the camera only. This warranty does not include batteries, or other accessories which have not been manufactured by our company. [. . . ] If this happens, download the images into your computer and save them for later use. Then, erase all images from the camera's memory so that you can take more pictures. (See also "Downloading Pictures from the Camera". ) 3 14 Viewing Pictures The pictures you have taken with your digital camera can be viewed on a television screen or downloaded to your computer. This section shows how to view pictures on a TV monitor. For information about downloading and viewing images on a computer, go to the section, "Downloading Images". Switch the camera to Play mode by pressing the Mode/Menu button and then releasing it instantaneously. The icon and the number of pictures that were taken are shown on the LCD panel. Connect your camera to the TV monitor using a TV cable. Plug one end of the TV cable to your camera's video output port. Plug the other end of the TV cable to the video input jack at the back of your TV monitor. To view the pictures, tune your television VIDEO OUTPUT to the appropriate Video Input. Refer to the owner's manual of your television for tuning instructions. (Hint: This step is similar to switching a television to the video input of a connected VCR. ) On the TV screen, you will see the very last picture that was taken. To scroll through the pictures, press the EV/+ button or the /- button. If you want to resume taking pictures, just press the Mode/Menu button to return to Record mode. Note Before you can view pictures on a TV, you need to identify first what video standard your television uses. If you have an NTSC standard TV, select the NTSC Output option in Menu mode. If you have a PAL standard TV, select the PAL Output option. 15 English Camera Options English Different sets of camera options are available under the Record and Play modes. Switch to either one with "Mode" button. Camera Options in Record Mode When you have set your camera to Record mode, you can control and change the following settings: Image quality settings You can set the image quality setting to either Normal or Fine quality. Normal Quality - This is the acceptable image quality for digital pictures. At Normal quality, you can take a maximum of 32 pictures with the camera. Fine Quality - Captures images at the best possible quality. If you select this option, you can take 16 pictures at the most. [. . . ] Connect the other end of the serial cable to the camera. Turn on your camera. Modem port PC MAC Note The camera's RS232 interface can be set to transmit data at varying baud rates depending upon the capabilities of your computer. When the camera is attached to your computer and remains inactive for a period of time greater than the Auto Power Off interval, it shuts down automatically. When the camera is attached to your computer, all the functional buttons are disable except the power I/O button. 22 For USB interface : (Optional for Macintosh) Note Downloading images through a PC's or Mac's USB port is faster than a serial port. Select camera TWAIN device and download (if it is not the primary TWAIN-compliant device) 1. [. . . ]