User manual VIVITAR VIVICAM 3620

[. . . ] Vivicam 3620 User Manual English 021009 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] To save battery power you can take pictures without the LCD Monitor. Simply turn off the LCD Monitor and use the Optical Viewfinder to frame the image as you would with a traditional camera. 23 Select the item by the Arrow buttons( ) and then press the OK button to confirm. The cursor skips to the data field as the OK button being pressed. Use the Arrow buttons( ) to select the desired setting. The cursor returns to the Record menu automatically when the change is made. Note: The setting is conserved even if the camera power is off. White Balance Select either one of the 5 (Auto, Sun, Shade, Fluorescent, Tungsten) white balance settings. The Auto white balance is recommended for most cases. For certain critical circumstances, if the result did not come out as expected, you may manually change to another white balance type according to the ambient lighting condition. ) and then press the OK button to confirm. Select the item by the Arrow buttons( The cursor skips to the data field as the OK button being pressed. Use the Arrow ) to select the desired white balance type. Press the OK button again to make buttons( the change. The cursor returns to the Record menu automatically when the change is made. 24 Reference: The approximate color temperature of the 4 above white balance settings (except Auto white balance) will be Sun = 5500K, Shade = 6000K, Fluorescent = 4000K and Tungsten = 2850K. Note: The setting is reset to AUTO when the camera power is off. EV Compensation Adjusts the exposure compensation over a range of -1. 8 to +1. 8 EV in steps of 0. 3 EV. ) and then press the OK button to confirm. Select the item by the Arrow buttons( The cursor skips to the data field as the OK button being pressed. Use the Arrow ) to increase/decrease the EV compensation value (-1. 8 ~ +1. 8). Press the buttons( OK button again to make the change. The cursor returns to the Record menu automatically when the change is made. Note: This setting is reset to 0. 0 when the camera power is off. 25 Play Mode In Play mode , users can review the recorded images on the LCD Monitor or on a TV. [. . . ] Multi-image (3x3 thumbnail) display Menu Button The Menu button is active in Record / Play / Delete modes. Press the Menu button to turn on the Record/ Play/ Delete menus. To access the Record/ Play/ Delete menu, simply rotate the Mode Dial to Record / Play / Delete modes and press the Menu button . To turn off the menu, press the Menu button again. [. . . ]