User manual VIVITAR VIVICAM 3635

[. . . ] Vivicam 3635 User Manual English 021009 Warranty Policy This camera is under warranty for one full year from the date of purchase by the original purchaser. In case of defects in materials or workmanship, we will replace or repair the camera free of charge. This warranty applies to the camera only. This warranty does not include batteries, or other accessories that have not been manufactured by our company. [. . . ] Through images will be displayed on the LCD monitor with a yellow frame. And the resolution will be displayed in the upper left of the screen, and the recording time will be displayed in the upper right of the screen. When movie mode is selected, the icon will appear on the status LCD. When the movie mode is selected and the main switch is set to , the LCD monitor will automatically turn on and display through image. (The LCD monitor will not turn off even when pressing the DISPLAY button. ) 4. The movie will be recorded while the shutter button is held down. During recording, REC will appear on the right side of the screen in red and the recorded time will be displayed. The optical zoom will not operate during movie recording. (Perform the operation before pressing the shutter button. ) 1 2 3 4 Ü Ü Using the Digital Zoom By combining the optical zoom (3x) and digital zoom (1. 5x, 2x), images can be recorded with a zoom of 4. 5 times to 6 times the original size. The digital zoom can only be used when optical zoom is set to TELE (3x). 22 1. 4. Enter the M-REC menu mode and press the / button to select Digital Zoom. Press the OK button to exit the M-REC menu mode. Press the (T) button until the optical zoom stops. Then, release the 5 WAY button and press the button again. A blue frame will appear on the LCD monitor and the magnification ratio will be displayed on the top right. Use the LCD monitor as the viewfinder for recording. 1 2 4 Ü Ü Pressing the / button each time will switch the magnification between 1. 5x and 2x. Digital zoom cannot be used when the LCD monitor is off. When using digital zoom, the picture quality may decrease compared to images recorded under normal conditions. Exposure Compensation The exposure can be compensated to intentionally brighten or darken the overall recorded image. The camera exposure can be adjusted within the range of ±1. 5EV at 0. 3EV intervals. Enter the M-REC menu mode and press the / button to select Camera Exposure. Press the / button to adjust the exposure compensation. Pressing the button will darken the image and the button will lighten the image. [. . . ] Follow the on screen instructions to complete the camera driver installation. Restart the computer Downloading Images 1. Connect the camera and PC using the USB cable supplied. Set the main switch on the top of the camera to , , will appear on the status LCD. [. . . ]