User manual VIVITAR VIVICAM 3675

[. . . ] Vivicam 3675 User Manual English 030326 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Turn the mode dial to the mode or the mode. Turn the LCD monitor on by pressing the button. Press the button to enlarge the subject. Press the shutter button down halfway, then press it the rest of the way down. E Using the digital zoom By using the digital zoom, images can be enlarged the center of the screen so that the subject appears closer. However, the more the image is enlarged, the grainier the image will become. The digital zoom function is only available when you set the LCD monitor and the digital zoom to ON. To enable the digital zoom, refer to DIGITAL ZOOM in Record/Manual record menu. Turn the mode dial to the mode or the mode. Turn the LCD monitor on by pressing the button. Press the button again to activate 2X digital zoom function. To cancel the digital zoom function, press the button. Press the shutter button down halfway, then press it the rest of the way down. 2X NOTE · You can only set the digital zoom at the resolution of 1600x1200 pixels; digital zoom is not available at the resolution of 800x600 pixels. When you play back the image recorded with digital zoom, the image size is 800x600 pixels. · The maximum zoom magnification is 2X for recording and 4X for viewing an image. · Digital zoom cannot be used in the movie mode. 19 Using the self-timer The self-timer duration is 10 seconds. After the activation of the self-timer by pressing the shutter button, the self-timer lamp starts blinking slowly for 7 seconds and then blinking faster for the rest of 3 seconds. With this design, you can get in the frame when taking group pictures. Secure the camera to a tripod or place it on a stable surface. The icon appears on the LCD monitor and status LCD. Press the shutter button down halfway, then press it the rest of the way down. After the self-timer indicator blinks for 10 s e c o n d s , t h e c a m e r a t a k e s a p i c t u re automatically. To cancel self-timer photography during the self-timer operation, press the button again. E NOTE · After one shot is taken, the self-timer mode is turned to off. 20 Using the macro mode Use the macro mode to shoot a close-up of the subject, such as flowers or insects. [. . . ] Switch the mode dial to the SETUP mode and then move to the option that you want to configure by using the / button. DATE/TIME Press the ENTER button to enter the DATE/TIME sub-menu. And then refer to SETTING THE DATE AND TIME to do the setting. When removing the batteries or AC power adapter from the camera, the date and time may return to the default setting. If this happens, reset the date and time when using the camera. [. . . ]