User manual VIVITAR VIVICAM 3705

[. . . ] Vivicam 3705 User Manual English 040408TP FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Note: When switching to a flash mode, it will take several seconds to charge the flash capacitor. While the flash capacitor is charging, the LED indicator will blink green and the flash icon will blink red on the LCD display. If you will not be using the flash, turn it off. Turning the flash OFF will result in faster camera startup and faster operation because the capacitor will not be charged needlessly. Turning the flash OFF when not needed will also improve battery life. 22 The camera has four flash modes: Automatic Flash (default), Red-Eye Reduction, Fill Flash (On), and Flash Off. The modes appear, cyclically, when you press the Flash mode Auto flash Red-eye reduction button. The table below will help choose the appropriate flash mode: Description The flash fires automatically according to the ambient lighting conditions. Select this mode for general flash photography. The flash emits a precursor-flash before the main flash fires. This causes the pupil in the human eye to constrict, reducing the red-eye phenomenon. Select this mode when taking images of people and animals in low-light conditions. Fill flash Flash off The flash will always fire regardless of the surrounding brightness. Select this mode for recording images with high contrast (backlighting) and deep shadows. Select this mode when taking images in a place where flash photography is prohibited, or when the distance to the subject is beyond the effective range of the flash. 23 Taking Images Manually You can manually adjust conditions such as EV compensation, white balance or ISO speed when taking pictures. For EV compensation, white balance or ISO speed information, refer to Exposure, White Balance or ISO in the Record menu. Open the lens cover, power on the camera. Move to Exposure, White Balance, or ISO using the button to enter a sub-menu. / buttons and then press the button to confirm your selection. Press the menu button to close the menus. 7. Press the shutter button to capture an image with your new setting. Still Image 1/3 Image Size Quality Exposure White Balance Exit:MENU 0. 0EV Auto Page Still Image 2/3 Digital Zoom On ISO LCD Brightness Exit:MENU Page Auto 0 Still Image 3/3 Burst Off Exit:MENU Page 24 PLAYBACK MODE In the playback mode, you can view, magnify, delete images, play video clips, or run a slide show. Playback mode also provides a thumbnail image display, allowing you to quickly search for the image you want. Viewing Images You may view your images without opening the lens cover since the lens is not used for playback. The camera lens is protected during playback. [. . . ] Of course, you can only do this if you have an SD memory card installed and some images in internal memory. To perform this function, press the button. Then, use the / buttons to select [Yes] and then press the button. 46 Setup Menu Select your general camera preferences in the Setup mode. Navigate to the option you wish to configure by using the / button until the Setup menu appears on the LCD buttons. Setup 1/3 Setup Date Type Date Setup Date Imprint 2/3 M/D/Y Off Page Setup Language USB Mode 3/3 Date Type Media M/D/Y Format Beep On Format Media Power Off 3 Min Reset To Default Page Format Media Page This utility formats the internal memory (or memory card) and erases all stored images and data - even if they have been protected. [. . . ]