User manual VIVITAR VIVICAM 3750

[. . . ] V3750 User Manual English 041020TP FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Secure the camera to a tripod or place it on a stable surface. After ten seconds, the camera takes an image. To cancel the self-timer at any time, press the shutter button to disrupt the sequence. Note: After an image is taken using self-timer, the self-timer mode is turned off. If you wish to take another image using the self-timer, repeat these steps. EN-21 Flash The flash is designed to function automatically when lighting conditions warrant the use of flash. You can capture an image using a flash mode suitable to your circumstances. If you change the flash mode, the camera will retain that setting even if the camera is turned off. button repeatedly until the desired flash mode appears. Compose the image and press the shutter button. Press the Note: If you will not be using the flash, turn it off. Turning the flash OFF will result in faster camera startup and faster operation because the capacitor will not be charged needlessly. Turning the flash OFF when not needed, will also improve battery life. Flash mode is disabled during portrait focus setting to avoid over-exposed photos. EN-22 The ViviCam 3750 has three flash modes: Automatic Flash (default), Automatic with Red-eye reduction and Flash Off. The modes appear, cyclically, when you press the button. The table below will help you choose the appropriate flash mode: Flash mode Automatic flash Description The flash fires automatically according to the ambient lighting conditions. Select this mode for general flash photography. The flash emits a precursor-flash before the main flash fires. Automatic with This Red-eye reduction causes the pupil in the human eye to Red-eye reduction constrict, reducing the red-eye phenomenon. Select this mode when capturing images of people and animals in low-light conditions. Select this mode when capturing images in a place where flash photography is prohibited, or when the distance to the subject is beyond the effective range of the flash. Note: The Flash mode is disabled when the portrait focus setting is used. EN-23 PLAYBACK MODE In the mode, you can view, magnify, delete images, play video clips, or run a slide show. Playback mode also provides a thumbnail image display, allowing you to quickly search for the image you want. Viewing Images 1. Power on the camera and toggle the the mode. To view the previous image, press the To view the next image, press the button to Press the button (same as the / button) once to display the detailed image information such as image quality & size, time and date. Note: If there are no images stored in memory, the "NO IMAGES" message will appear on the LCD monitor. You can also view your images on the TV screen. [. . . ] Of course, you can only do this if you have a memory card installed and some images in internal memory. To perform this function, use the / button to select [COPY] and then press the OK button. EN-45 Setup Menu Select your general camera preferences in the Setup mode. Navigate to the option you wish to configure by using the / button. LCD BRIGHTNESS This option adjusts the brightness of the LCD monitor. To adjust the LCD brightness, you may increase or decrease the LCD brightness by using the / button. DATE/TIME After removing the batteries from the camera, the date and time may return to the default settings. [. . . ]