User manual VIVITAR VIVICAM 3915

[. . . ] NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] ] as the Scene mode, flash mode defaults to [ ] while the focus mode is switched to [ A ]. ]. Flash mode is automatically set to [ 29 Self-Timer By using the [ ] self-timer you can get into the scene when capturing group shots. You can capture images with the self-timer in any scene mode (Auto/Sports/Night Scene/Portrait/Landscape/Back Light). Self-timer duration can be set to 10 seconds or 5 seconds. Self-timer mode appears cyclically as [10 s] [5 s] [Display Off]. After the self-timer is set, the shutter automatically releases after 10 seconds or 5 seconds. The self-timer lamp starts blinking relatively slow for the first 7 seconds or the first 2 seconds and then blinks rapidly for the last 3 seconds. Secure the camera to a tripod or place it on a stable surface. Open the lens cover and press the POWER button to turn on your camera. Set the scene mode in the Capture menu based on the desired scenery. (Auto/Sports/Night Scene/Portrait/Landscape/Back Light). The count down is displayed on the LCD monitor. To cancel the self-timer, press the [ ] button to disrupt the sequence. E F Note: G In Capture mode, press the button to set self-timer ON. After each self-timed image is captured, the self-timer is turned OFF. S 30 Portrait-Focus Mode Use [ ] Portrait-Focus mode to capture close-ups of subjects such as flowers or insects. The effective range is between 2. 5 and 5 feet. Open the lens cover and press the POWER button to turn on your ViviCam 3915. Slide the focus switch located on the front side of the camera to ] position. the [ LCD monitor will display [ ] as Portrait-Focus mode. To disable portrait photography, slide the focus switch back to the [ ] Landscape-Focus mode. Note: When shooting a close-up in the [ ] Portrait-Focus mode, use the image LCD monitor to compose your image, avoiding the off-center parallax phenomenon. In [ ] Portrait-Focus mode, EV compensation, Scene mode and ISO speed cannot be set. In [ ] Portrait-Focus mode, Flash mode is automatically set to [ ] Flash off. After a portrait shot is taken DO NOT FORGET to reset the lens to the [ 31 Setting Image Resolution and Quality Resolution and quality settings determine the pixel size (dimension), image file size, and compression ratio for your images. These settings affect the number of images that can be stored in memory, or on an SD memory card. [. . . ] In some scenes you may prefer sharper edge detail. In other scenes you may prefer softer edge detail. H E Date Imprint L Sharpness High Medium Low F If you set imprint function, your image will be displayed with date on it. [Off]: Date will not be shown on the captured image. [On]: Date will be shown on the captured image. Off On G Setup S Refer to "Setup Menu" in LIST OF MENU OPTIONS. 62 Playback Menu Using the Playback menu you can create an on-camera slide show. You may also delete images, and format your SD memory card or the internal memory. [. . . ]