User manual VIVITAR VIVICAM 8300S

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Select this mode when you want to capture photos of sun] Sunrise [ rise scene. This mode helps keep the deep hues in the scene. [ [ EN-42 ] Splash Water ] Firework Select this mode when you want to capture photos of splashing water. Select this mode when you want to capture fireworks clearly with optimal exposure. The shutter speed be comes slower, so using a tripod is recommended. Digital Camera >> The available capture menu in scene mode: Auto Panorama Landscape Candlelight Text Sunset Sunrise Splash Water Firework User's Manual >> Size Quality Sharpness Saturation Color White Balance Manual WB ISO Metering * : Available X: Unavailable EN-43 Setting the Panorama Mode This mode is designed to make it easier to take a series of shots then stitch them together with software to make a single photo. You can capture a photographic subject that won't fit into a single frame, such as a landscape, and stitch it together later with a program such as Cool 360 or Photoshop application. Select [Scene Mode] with the / buttons, and press the SET button. Select [Panorama] with the / buttons, and press the SET button. The next image appears beside the previous image. Orient the ViviCam 8300s so that the second frame overlaps a small portion of the photographic subject of the first image and press the shutter button to capture the next image. Follow the same steps to capture subsequent images in the sequence. Finish the sequence by pressing the MENU button or switch to another mode after the last image has been recorded. EN-44 Digital Camera >> [ ] Movie Mode This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. Slide the mode switch to [ ] and set the mode dial to [ ]. The recording of the video clip will start. Pressing the shutter button again will end the recording and save the video on the SD card. The recording time depends on the storage size and the subject of the image to be recorded. Zoom function can be used during video recording without audio. You can record video clips with Audio freely, but no zoom function at this condition. User's Manual >> EN-45 When recording video clips, the flash cannot be used. While the image is being recorded into the SD card, do not open the battery/SD card cover, nor remove the battery or SD card. Doing so might damage the SD card or destroy the data. [ ] PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. Insert the SD card into the ViviCam 8300s and turn on the power before starting. The images can be fed in reverse or fed forward with the / buttons. EN-46 Digital Camera >> Image Display Information You can switch the state of the information display by pressing the button when playing back images. [. . . ] The flash cannot The flash is set to flash off. Even though the flash The distance to the subject fired, the image is dark. The image was captured in a dark place while set to flash off. The image lacks natural The image was captured in color. [. . . ]