User manual VOLTA 2830

[. . . ] Micro sistemi 2830 composto da 2830 (apparecchio principale) e CP-DAB9H (sistema di diffusori). 2830 micro systeem bestaande uit 2830 (hoofdtoestel) en CP-DAB9H (luidsprekersysteem). 2830 Sistema de Micro Componente composto de XLDAB9H (unidade principal) e CP-DAB9H (sistema de alto-falante). 2830 Micro Component System consisting of 2830 (main unit) and CP-DAB9H (speaker system). DEUTSCH Siehe Seiten i bis x und D-1 bis D-38. [. . . ] The right speaker is the one on the right side when you face the unit. Do not allow any objects to fall into or to be placed in the bass reflex ducts. DAB rod aerial Right speaker Left speaker Incorrect FM aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. External FM aerial: Use an external FM aerial if you require better reception. Consult your dealer. External FM aerial Wall socket (AC 230 V, 50 Hz) White line Plain Preparation for Use 8 E-6 05/7/12 2830(H)E1. fm TINSZA071SJZZ 2830 System connections (continued) DAB aerial adjustment Raise and extend the telescopic rod aerial, then adjust the position and length for the best reception. ENGLISH To turn the power on Press the ON/STAND-BY button to turn the power on. Preparation for Use AC power connection After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then plug the AC power lead of this unit into the wall socket. After use: Press the ON/STAND-BY button to enter the power stand-by mode. Wall socket (AC 230 V, 50 Hz) Notes: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. Never use a power lead other than the one supplied. Otherwise, a malfunction or an accident may occur. E-7 05/7/12 2830(H)E1. fm TINSZA071SJZZ Remote control Battery installation Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them toward the battery terminals. Notes concerning use: Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. If the "0:00" is not flashing in step 1, step 2 (for selecting the 24-hour or 12-hour display) will be skipped. To change the 24-hour or 12-hour display: 1 Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on page 37 for details. ] 2 Perform "Setting the clock" from the beginning. "0:00" "AM12:00" The 24-hour display will appear. (0:00 - 23:59) The 12-hour display will appear. (AM12:00 - PM11:59) Basic Operation 8 E-10 05/7/12 2830(H)E1. fm TINSZA071SJZZ 2830 CD or MP3/WMA disc playback This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the equipment used for recording. It is an acronym which stands for MPEG Audio Layer 3. MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality. The MP3 track indicator will light up when an MP3 track is read. This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and VBR files. During VBR file playback, time counter in the display may differ from its actual playback time. [. . . ] Move the unit to another room or near the window, then tune in manually (see page 20). Some DAB channels do not offer secondary services. " " appears next to the station name when secondary services are available (see page 19). ENGLISH General Symptom The clock is not set to the correct time. When a button is pressed, the unit does not respond. [. . . ]