User manual VOLTA 4554 GUAVA RED

[. . . ] You can easily install it where your Wi-Fi signal needs enhancement and enjoy high-speed wireless performance without any hassles. The latest 802. 11n technology is built into the 4554 GUAVA RED to broaden its wireless coverage and to eliminate dead spots within the wireless range. The 4554 GUAVA RED complies with wireless 802. 11b/g/n standards and can reach data transmission rates of up to 300Mbps when connected to wireless 802. 11n devices. It provides faster and more reliable wireless connections than standard 802. 11b/g wireless networks. [. . . ] Set the RTS threshold of wireless radio. Set the beacon interval of wireless radio. Set the wireless data transfer rate to a certain value. Since most wireless devices will negotiate with each other and pick a proper data transfer rate automatically, it’s not necessary to change this value unless you know what will happen after modification. Set the data rate of 802. 11 N clients, available options are MCS 0 to MCS 15. It’s safe to set this option to ‘Auto’ and it’s not necessary to change this value unless you know what will happen after modification. Select wireless channel width (bandwidth taken by wireless signals of this access point). It’s suggested to select ‘Auto 20/40MHz’. Do not change to ’20 MHz’ unless you know what it is. Set the type of preamble of wireless radio. The default setting is ‘Short Preamble’. In Registrar mode the device is set to connect to your clients. Press the button to start the WPS process. The device will wait for the WPS request from the wireless devices within 2 minutes. You can fill-in the PIN code of the wireless device and press the button to start the WPS process. The default filename is ‘config. bin’. You can save it as another filename for different versions, and keep it in a safe place. Press ‘Browse…’ to pick a previously-saved configuration file from your computer, and then click ‘Upload’ to transfer the configuration file to the device. After the configuration is uploaded, the configuration will be replaced by the file you just uploaded. Click this button to remove all settings you made and restore the configuration of this device back to factory default settings. Restore Settings Restore to Factory Default Upgrade If there is a new firmware available, you can upload the firmware to the device to get extra functions or problem fixes. Click the ‘Browse’ button. You’ll be prompted to provide the filename of the firmware upgrade file. Please download the latest firmware file from our website, and use it to upgrade your device. [. . . ] These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. [. . . ]