User manual VOLTA U5001

[. . . ] 2 · Insert the hose until the catches click to engage. 3 · Attach telescopic tube to the hose handle and floor nozzle by pushing together. [. . . ] Use the floor nozzle for loose rugs and the upholstery nozzle for curtains, cushions etc. Confined areas: Use the crevice nozzle for crevices, corners and radiators. Dust bag indicator and changing the dust bag For peak performance the dust bag must be changed when full. If the dust bag breaks in the cleaner, the Vacuum Cleaner must be taken to an Authorized Service Centre for cleaning. The dust bag indicator window will gradually turn red when filling and completely red when full. To check the dust bag, the cleaner must be switched on, with all attachments connected and off the floor. The dust bag full indicator may signify that the bag is blocked (occasionally caused by very fine dust) which will cause loss of suction and may result in overheating. If this occurs change the dust bag even if it is not full. To change the dust bag: A Release catch and swing back lid before removing the dust bag, bend the tab into the hole to prevent dust escaping B Remove the dust bag C Insert new dust bag by fitting the bag slots over holder. We recommend the dust bag is changed: * after using a carpet cleaning powder. * if there is a bad smell from the cleaner, then you should also change the filter. Note: use only original dust bags and filters. Troubleshooting 1. [. . . ] Volta vacuum cleanerfeatures and accessories are protected wolrdwide by Patents or Registered Designs. This product, designed with the enviroment in mid, uses recycled materials where possible. TCF Thank you purchasing your Vacuum Cleaner and we trust it will give you many years of statisfactory service. To keep your cleaner operating at th elevel of effinency for which it was recommend you use only Genuine Dust Bags, Filters, and Accessories. [. . . ]