User manual VOODOO LAB MX-28M INFORMATION

[. . . ] Plug the Power Adapter into a suitable wall outlet. Plug the Power Adapter connector into the power jack on the MX-28M. ROUTING For each MX-28M OUTPUT, use the corresponding three-position switch to select either INPUT 1, INPUT 2 or the PROCESSOR as the source for that OUTPUT. PROCESSING The MX-28M is extremely easy to program. [. . . ] These zones can be splits, layers or combinations of both. Each zone is then output on its own MIDI channel to each selected output. The first defined zone is transmitted on the same MIDI channel number as the input channel number, and each of up to three additional zones are output on the next higher MIDI channel number. Example: If four zones are defined and the input channel is MIDI channel 4, the zones will be output as follows. zone 1 on channel 4 zone 2 on channel 5 zone 3 on channel 6 zone 4 on channel 7 Select MAP (the uppermost position) with the Function Select Switch. The default MAP sends the entire keyboard range to all four zones (i. e. four channels are layered on each note) for instant LAYERING. To define SPLITS and LAYERS in any combination, press the PGM button. When the PGM button is pressed, the Red LED above the word "RANGE" will blink to indicate that Range #1 can now be entered, and the Green LED above the word "LOW" will illuminate. Enter the low note for the first RANGE from your controller connected to INPUT1. The Green LED above the word "HIGH" will illuminate. Press the high note for the first RANGE. The Red LED will now blink to indicate that RANGE 2 can be entered. Continue entering ranges, --low note first, then high note--until you have defined four ranges. If you want fewer than four ranges, press the PGM button after playing the high note of the last RANGE you wish to define. If a RANGE is defined by entering the higher note first, then no notes will be output from that zone. Example 1 INSTANT LAYERING: If you wish to send all notes on four channels to each selected OUTPUT, select MAP with the Function Select Switch. Data on four consecutive channels (starting with the input channel number) will be sent to each selected OUTPUT. [. . . ] These LEDs also serve as programming guides while processing functions are being defined. WARRANTY Digital Music Corporation warrants this product against any defects that are due to faulty material or workmanship for a period of five years from the date of original retail purchase. This warranty does not include damage to the product resulting from accident or misuse. This warranty is given to the original purchaser only and it is not assignable to any other person. [. . . ]