User manual VTECH 3-IN-1 LEARNING ZEBRA SCOOTER

[. . . ] Kids can discover their wild side as they move with the zebra and explore new territory with the scooter's walkie-talkie, compass and flashlight. The zebra's mane features five light-up buttons that teach colors, animals and destinations. The scooter also features fun horn buttons and a volume control switch. HORN BUTTON RECOGNITION SLOT MODE SELECTOR SMILE BUTTON VOLUME CONTROL SWITCH BUCKET Introduction LIGHT-UP BUTTONS INCLUDED IN THIS PACKAGE One seat One zebra body and two longer screws One big screw Three play pieces and one bucket Two front wheels One user's manual One axle, one wheel fastener and one wheel cover with two shorter screws Included in This Package One zebra head with electronic parts Two handles WARNING: All packing materials, such as tape, plastic sheets, wire ties and tags are not part of this toy, and should be discarded for your child's safety. NOTE: Please keep this instruction manual as it contains important information. GETTING STARTED 1. [. . . ] You will hear a loud `click' sound to indicate the seat and support are locked into place. Converting the 3-in-1 Learning Zebra Scooter ATTENTION: The maximum weight for this product is 2 pounds. It is not recommended for children older than months. Before riding the scooter, please make sure the handle is securely locked in place. Please wear appropriate safety gear, including a helmet and knee pads, when riding the scooter. Please ride the scooter on a smooth surface, such as a sidewalk. Do not ride the scooter on the street, or on gravel, sand or water. Always ride the scooter during daylight. Always wear shoes when riding the scooter. 3. To disassemble the walker mode, squeeze the two locks under the seat, then put down the support plate and the seat. 4. To change to scooter mode, pull the seat up to meet the neck, and tighten the big screw under the seat. 5. To disassemble the scooter mode, press and hold the black button on the side of the neck, then unscrew the big screw under the seat. PRODUCT FEATURES 1. MODE SELECTOR To turn the unit ON, slide the MODE SELECTOR to the MUSIC MODE ( ), the FOLLOW THE LIGHTS MODE ( ), the ANIMAL MODE ( ) or the EXPLORE & LEARN MODE ( ) position. To turn the unit OFF, slide the MODE SELECTOR to the OFF ( ) position. Product Features 2. VOLUME CONTROL SWITCH To adjust the volume, slide the VOLUME CONTROL SWITCH located on the head to LOW VOLUME ( ) or the HIGH VOLUME ( ) position. . AUTOMATIC SHUT-OFF To preserve battery life, the VTech® Jungle GymTM -in-1 Learning Zebra ScooterTM will automatically power-down after approximately 45 seconds without input. The unit can be turned on again by pressing any button. ACTIVITIES 1. Slide the mode selector to the Music Mode, Follow the Lights Mode, Animal Mode or Explore & Learn Mode position to turn the unit on. You will hear a song, playful phrase and a short tune. The lights will flash with the sounds. 2. Place the flashlight, compass or walkietalkie into the slot at the top of the zebra head to learn objects and directions. Upbeat short tunes and fun sounds will accompany the play. Press the horn button on the left handle to hear fun horn sounds, a playful phrase, or a song depending on the selected mode. [. . . ] It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department on at 1-800-521-2010 in the U. S. or 1-877-352-8697 in Canada, with any problems and/or suggestions that you might have. A service representative will be happy to help you. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]