User manual VTECH DS6151

[. . . ] User's manual w w w. v t e c h p h o n e s . c o m Model: DS6151 Congratulations on purchasing your new VTech product. Before using this telephone, please read the Important safety instructions on page 81 of this manual. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. [. . . ] Press or to browse and select the desired entry, then press the ASSIGN softkey to confirm your selection. Press the MENU softkey when the telephone base is not in use. Press /CID or /DIR to select Directory, then press the SELECT softkey. Press /CID or /DIR to select Speed dial, then press the SELECT softkey. The screen shows a list from 1:<empty> to 0:<empty>. Press /CID or /DIR to select the desired speed dial location, then press the REPLACE softkey. The screen shows the directory listed in chronological order. Press /CID or /DIR to browse and select the desired entry, then press the ASSIGN softkey to confirm your selection. DIRECTORY Review Add contact Speed dial BACK SELECT SPEED DIAL 1:<empty> 2:<empty> 3:<empty> DELETE REPLACE VTech 800-595-9511 ASSIGN SPEED DIAL 1:VTech 2:<empty> 3:<empty> DELETE REPLACE Review Add contact Speed dial SELECT SPEED DIAL 1:<empty> 2:<empty> DELETE REPLACE VTech 800-595-9511 ASSIGN SPEED DIAL 1:VTech 2:<empty> DELETE REPLACE 50 Telephone operation Review the speed dial directory Using the handset: 1. Press the MENU softkey when the handset is not in use. Press or to select DIRECTORY, then press the SELECT softkey. Press or to select Speed dial, then press the SELECT softkey. Press the MENU softkey when the telephone base is not in use. Press /CID or /DIR to select Directory, then press the SELECT softkey. Press /CID or /DIR to select Speed dial, then press the SELECT softkey. Press /CID or /DIR to browse. DIRECTORY Review Add contact Speed dial BACK SELECT Review Add contact Speed dial SELECT Dial a speed dial entry Using the handset: 1. When the handset is not in use, press and hold the assigned number of the desired speed dial entry. When the telephone base is not in use, press and hold the assigned number of the desired speed dial entry. Press LINE 1 or LINE 2. 51 Telephone operation Edit a speed dial entry Using the handset: 1. When the handset is not in use, press and hold the assigned number of the desired speed dial entry. When the desired entry appears, press the EDIT softkey. Use the dialing keys (0-9) to edit the number. · Press OFF to backspace and erase a digit. [. . . ] If you have questions about what will disable alarm equipment, consult your telephone service provider or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty. 86 Appendix FCC, ACTA and IC regulations (continued) If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. [. . . ]