User manual VTECH E2801

[. . . ] User's manual E2801 2. 4 GHz cordless telephone with caller ID/call waiting Congratulations on purchasing your new AT&T product Before using this AT&T product, please read the Important safety instructions on pages 40-42 of this manual. Please thoroughly read the user's manual for all the feature operation and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www. telephones. att. com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. Model #: Type: Serial #: (found on the bottom of the telephone base) Purchase date: Place of purchase: E2801 2. 4GHz cordless telephone © 2007 Advanced American Telephones. [. . . ] The most recent call is displayed first. Press CID/-VOLUME or DIR /VOLUME+ to scroll through the list. Press OFF/CLEAR to return to the idle screen. NOTE: You can also display the caller ID entries in the call log, when handset is idle, press MENU/SELECT, then CID/-VOLUME to choose CALL LOG, and then press MENU/SELECT. Pat Williams 555-1234 NEW 10:31PM 11/23 Jeffrey Adams 555-9876 NEW 10:21AM 11/23 To return a call Press PHONE/FLASH or played number. SPEAKER to call the dis- Chris Thompson 908-555-0100 NEW 10:11 AM 11/23 - OR Chris Thompson 1-908-555-0100 NEW Caller ID numbers may appear with an area code that may not be required for local calls, or without a 1 that may be needed for long distance calls. If the number displayed is not in the correct format, you can change how it is dialed. To change the number before dialing, press # repeatedly to see different dialing options (you can choose to dial with or without an area code, and with or without the 1), then press PHONE/FLASH or SPEAKER to dial the number. 10:21AM 11/23 Chris Thompson 1-555-0100 NEW 10:11AM 11/23 Chris Thompson 555-0100 NEW 10:11AM 11/23 28 Caller ID operation To review the call log Other options while reviewing the call log · Press DELETE to delete the current entry from the call log. Chris Thompson 555-0100 NEW 10:11AM 11/23 DELETE ALL: YES · Press and hold DELETE to delete all entries from the call log. When asked to confirm, press CID/-VOLUME to choose YES then MENU/SELECT to clear the call log of all entries, or press CID/-VOLUME to choose NO then MENU/SELECT to exit and leave all call log entries intact. · Press MENU/SELECT to copy this entry into the directory. If the name or number is not provided, you will be prompted to enter them (pages 20-21). CALL LOG EMPTY Press and hold screen. OFF/CLEAR to return to the idle NOTE: If neither the name nor number are not provided, UNABLE TO SAVE will be displayed. 29 Appendix Screen icons, indicator lights & tones Screen icons & alert tones Screen icons Battery charging (animated display). HANDSET 1 MUTE NEW Low battery (flashing); place handset in telephone base to recharge. Ringer off. MUTE NEW 10:01AM 11/23 Microphone is muted. Missed and un-reviewed calls. Handset alert tones Two short beeps Four short beeps Two beeps Confirmation tone The volume level is at the maximum or minimum setting. Out of range from the telephone base while on a call. Command completed successfully. Indicator lights CHARGE/IN USE · On when the cordless handset is properly positioned to charge in the telephone base. · Flashes quickly when there is an incoming call. · Flashes when the handset is in use, or when another telephone is in use on the same line. VOICEMAIL Flashes when you have new voicemail. (requires voicemail service from your local telephone company). On when speakerphone is in use. SPEAKER 30 Appendix Handset display screen messages Screen display messages XX MISSED CALLS ALREADY SAVED CALL LOG EMPTY CHARGING CHECK BATTERY!There are new calls in the caller ID log. The telephone number entered is already stored in the directory. The handset with a low battery has been placed to charge in the telephone base. The battery is not installed or not installed properly in the handset. -OR-OR- The battery needs to be replaced. An incorrect battery has been installed by mistake. Use only the supplied rechargeable battery or replacement battery (model 27910, part number 89-0099-00-00) or equivalent. [. . . ] How do you get warranty service? To obtain warranty service in the United States of America visit www. telephones. att. com or call 1(800) 222-3111. NOTE: Before calling for service, please review the user's manual - a check of the PRODUCT controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you, transportation, delivery or handling charges prepaid. [. . . ]