User manual VTECH E2811

[. . . ] User's manual E2811 2. 4 GHz cordless telephone/ answering system with caller ID/call waiting FLASH CLEAR TONE MUTE REDIAL PAUSE DELETE Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 50-52 of this manual. Please thoroughly read the user's manual for all the feature operation and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www. telephones. att. com or call 1 (800) 222-3111. [. . . ] · Press VOLUME SKIP 1. PLAY/STOP "You have [xx] new messages and [xx] old messages" Message playback begins. See options at right. 2. PLAY/STOP to end message playback. button to adjust speaker vol- NOTES: 1. If F is flashing in the message window, memory is full. You will have to delete some messages before new ones can be received. If you receive calls when the memory is full, the telephone will ring 10 times, then answer and announce "Memory is full, enter remote access code. " 4. New (unheard) messages cannot be deleted. to skip to next message. · Press REPEAT to repeat message currently playing. · Press DELETE to delete message being played to stop playback. PLAY/STOP To delete all messages To delete all old messages, press and hold DELETE while the telephone is idle (not during a call or during message playback). NOTE: If there are many old messages in the mailbox, press and hold X DELETE to delete all old messages. The message window will show a flashing - -. During deletion, if there is an incoming call, the answering system will stop deleting messages and exit. In this case, only some of the old messages may be deleted. 34 Answering system operation Recording & playing memos Memos are messages you record yourself. They are saved, played back and deleted exactly like incoming messages. You can record a memo as a reminder to yourself, or leave a message for someone else if other members of your household are using the answering system. Elapsed time (in seconds) is shown in the message window as you record. You can record a memo up to four minutes long. Memos less than one second long will not be recorded. To play back a memo Press PLAY/STOP to hear messages and memos (see page 34 for other options). Elapsed recording time (seconds). Press to stop recording. Press STOP when you are done. " 1. 2. Speak into microphone. Microphone 3. PLAY/STOP "Recorded" the memo has been recorded. 35 Answering system operation Message counter displays The message counter usually displays the total number of memos and incoming messages. See the list below for explanations of other displays in this counter. Message counter Message counter displays 0 0 (flashing) 1-99 1-99 (flashing) No messages. Total number of messages and memos, or message number currently playing. The number flashes when there are new (un-reviewed) messages. If the telephone loses power, after power is restored, the number in the message counter will flash to indicate the clock needs to be set. 10-99 1-99 (counting) Current remote access code while setting (page 33). [. . . ] The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you, transportation, delivery or handling charges prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty. 57 Appendix Limited warranty 6. [. . . ]