User manual VTECH MI 6866AND70AND90QSG

[. . . ] STEP 1 Check package contents (mi6866) STEP 3 Battery installation 1. Align the two holes in the plug with the socket pins, then snap the plug into place. [. . . ] Press TIME/SET again to indicate changes needed. Press CHANGE to change the day, hour, minute, or year. When you hear the correct setting, press TIME/SET to advance to the next setting. NOTE: If you have caller ID service, the time will automatically be updated with the first incoming call after you program the year into the system. Telephone line cord Beltclips(4) Batteries(4) Quick start guide Base power adaptor Wall mount bracket User's manual Base power adaptor Wall mount bracket User's manual STEP 1 Check package contents (mi6870) Make sure your phone's packaging includes the following: STEP 2 Connect power to telephone base/ chargers STEP 5 Connect to phone line Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone base. Then plug the other end of the cord into the wall telephone outlet. Telephone outlet STEP 8 Record your outgoing announcement Plug the power adaptor into an electrical outlet not controlled by a wall switch, and the connector into the power jack on bottom of the telephone base/chargers. Charger power adaptor AC power outlet AC power outlet 1. Press SETUP, the system announces "Announcement. To continue setup, press SETUP. " 2. Press REC/MEMO and speak toward the MIC on the base to record an announcement for up to 90 seconds. Press PLAY/STOP / (whenfinishedrecording). [. . . ] Visit our website at www. vtechphones. com or in Canada, www vtechcanada. com. Call our customer service at 1-800-595-9511 or 1-800-267 7377 in Canada. Base power adaptor Wall mount bracket User's manual 96-006101-030-000 [. . . ]