User manual VTECH VT 9171

[. . . ] Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] The current "hour" will be announced then. Press SELECT to change the hour setting. Press SET to set the hour of the system clock. The current "minute" will be announced then. Press SELECT to change the minute setting. Press and hold the SELECT to increase the value by ten. Press SET to set the minute of the system clock. The whole system day & time will be announced to confirm your setting. 5. 6. NOTE : If the user touches any of the following base keys: TIME/SET, SELECT, MENU, ERASE, REC/MEMO, REPEAT, SKIP, ANSWER, MAILBOX 1, 2, 3, VOL+, VOL- while there is new messages and the alert is on, the ITAD will stop the periodic alert. There will be message alert again if new messages are received. This provides a convenient way to disable the alert. Also, when the base is in speakerphone mode, the alert will also be disabled temporally. 7. Set Announce-only The answering machine can be set to announce-only, i. e. the ITAD just announces the announcement only OGM and does not allow the caller to leave any messages. 900MHz VT 9171 TIME/SET SELECT MENU 8. Set Audible Message Alert If you want your system to beep once every 10s to notify you when new messages have been received, set the Audible Message Alert to on. To change the settings: MENU To set the selection: MENU REPEAT/ SLOW ERASE REC/ MEMO CHARGE SKIP/ QUICK ANSWER ON/OFF 1. SPARE BATT PLAY/ST OP IN USE Press MENU until "Set announce-only" is announced. TIME/SET MAILBOX 3 MAILBOX 1 MAILBOX 2 REDIAL MUTE MEM HOLD 1. Press MENU until you hear "Set Audible Message Alert". 36 1 4 2 ABC 5 3DEF 6 FLASH 2. Press SET now will announce the current setting. VOL 37 6 rings SELECT The incoming call is answered after 6 rings. 3. Press SELECT until desired setting -- " on" or "off" is declared. The previous setting will be announced at the first time you press this key. VT 9171 Toll Saver The incoming call is answered after 2 rings only if there are new messages/memos present in memory, otherwise, answers call after 4 rings. Thus, if Toll Saver is active and your ITAD rings 3 times when you call, you can hang-up to avoid any long distance charges. 900MHz ii) TIME/SET SELECT MENU REPEAT/ SLOW SKIP/ QUICK ANSWER ON/OFF To change ring type setting: MENU 4. Press SET to set the announce-only mode on/off and the setting will be announced once more to confirm the selection. ERASE REC/ MEMO CHARGE IN USE Note that the OGM will be automatically set to the corresponding OGM's according to the mode selected. 900MHz VT 9171 TIME/SET SELECT MENU SPARE BATT OP PLAY/ST 1. REDIAL MAILBOX 3 MAILBOX 1 MAILBOX 2 Press MENU until you hear "Set Number of Rings". TIME/SET Set Call Screening MENU REPEAT/ SLOW SKIP/ QUICK ANSWER ON/OFF REC/ MEMO CHARGE SPARE BATT MUTE HOLD MEM 1 4 GHI 2 ABC 5 JKL 8 TUV 0 OPER 3DEF 6MNO 9WXYZ # FLASH 2. VOL Press SET now will announce the current setting. SELECT ERASE IN USE PLAY/ST OP MAILBOX 3 1. Press MENU until "Set Call-screening" is announced. TIME/SET 7PQRS TONE MAILBOX 1 MAILBOX 2 REDIAL MUTE MEM INTERCOM SPEAKRPHONE 3. HOLD 1 4 GHI 7PQRS TONE 2 ABC 5 JKL 8 TUV 0 OPER 3DEF 6MNO 9WXYZ # FLASH 2. VOL Press SET now will announce the current setting. SELECT MIC Press SELECT until you hear the desired ring type (2, 4, 6 or toll saver). The previous setting will be announced at the first time you press the key. Press SET to confirm your choice and the selected setting is then announced. 4. Press SELECT to toggle the choices ("on" or "off"). The existing setting will be announced the first time that the key is pressed. INTERCOM SPEAKRPHONE MIC Quit from menu setting mode · During setting up the ITAD in the menu mode, the user can quit the menu setting mode by pressing the MAILBOX X key anytime except in OGM recording mode. The system will exit menu mode automatically if no key is press within 20 s in menu mode except in minute setting in Day & Time item. [. . . ] Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents or by others who may be authorized by the FCC. For repair procedures, follow the instructions outlined under the VTECH Limited Warranty. This equipment may not be used on coin service provided by the Telephone Company or Party Lines. The REN is useful in determining the number of devices you may connect to your telephone line and still enable the devices to ring when you receive a call. [. . . ]