User manual VTECH VT1121

[. . . ] IMPORTANT SAFETY INSTRUCTIONS When useing your phone equipement, basic precautions should always be followed to reduce the risk of fire, electic shock and injury to persons, including the following: 1. Following all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid, cleaners or aerosol cleaners. Use a damp cloth for cleaning. [. . . ] Line modular Jack IMPORTANT: Be sure that the batteries are installed correctly. For better performance and longer operating time, we recommend the use of alkaline batteries. (b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)batteries. If the unit is not to be used for an extended period of time, remove all the batteries. * * * * * * * * * * * * * * * * 2. Input your area code using the dialing keys or press < or > to select, press DEL Button to confirm. Continue to input Area Codes 2 and 3 if necessary. Connecting the Telephone Line Cords: One coiled handset cord, and a telephone line cord are packed with this unit. Insert one modular plug of the coiled cord into the handset jack and the other plug into the on the left side of the base. 3 4 5 TELEPHONE OPERTION To Change the Caller ID To edit the Language, Area Code, Long Distance Code and Time/Date, press only the < and> Buttons simultaneously for about 4 seconds and then proceed as described above to set the Language, Area Code, Long Distance Code and Time/Date. If you press the DEL button at the same time as the < and > buttons as described above for the initial setup, all previous CID settings will be deleted. Flash Button For Residential phone systems with "Call Waiting Service", instead of pressing the HOOK SWITCH to pick up the other call, press the FLASH Button. This will automatically send the correct signal to the telephone company to switch calls. The amount of time you hold the FLASH Button down is not critical. Elapsed Call Time During a call, the LCD panel will display the elapsed time of the current conversation. CALLER ID OPERATION Ringer Hi/Low Switch 1. " Hi" Position: Ringer sounds to alert you to incoming calls. "Low" Position: Ringer sounds at a lower level to minimize disturbance by incoming calls. The PULSE position is used if your local telephone system only offers Pulse (rotary dial) service or if Tone service is available but you do not subscribe to it. The TONE position is used if you subscribe to Tone Dialing (DTMF) service. If you are not certain what type of service you have, check with your local telephone company. Dialing Keys To make a phone call, pick up the Handset. When you hear the dial tone, dial out the phone number you are calling using the keys 1 to 9 and 0. The number dialed will be shown in the LCD panel. When your call is completed, hang up the handset. [. . . ] VTECH will return repaired or replacement products to you in working condition. VTECH will retain defective parts, modules, or equipment. Repair or replacement of Product, at VTECH's option, is your exclusive remedy. You should expect the repair or replacement to take approximately 30 days. [. . . ]