User manual WACOM BAMBOO

[. . . ] Contents Index 1 User's manual for Windows & Macintosh ® ® Using a pen Customizing your pen Troubleshooting Using a tablet Customizing your tablet Digital inking Contents Index 1 Contents Index 2 BambooTM User's Manual for Windows® & Macintosh® English version 1. 1, April 26, 2007 Copyright © Wacom Company, Limited, 2007 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. [. . . ] Verify that you have connected the tablet to an active USB port. First open the Pen Tablet control panel and select the TABLET tab. Use the pull-down menus to DISABLE all of the ExpressKeys. Now press both the upper left and lower right ExpressKeys and hold them down for three (3) seconds. · Do a quick check of the ExpressKeys by pressing each one in turn. All of the ExpressKeys should glow at a brighter level each time you press a key. · Do a quick check of the Touch Ring by sliding your finger around it. All of the ExpressKeys should glow at a brighter level when you touch the ring. · Check the pen by first opening the Pen Tablet control panel and selecting the PEN tab. Click on the DEFAULT button to return the pen to its default settings. Next: Touch the pen tip and then the eraser to the tablet active area. All of the ExpressKeys should glow brightly each time the tip or eraser makes contact with the tablet surface. Without applying pressure to the pen tip, hold the pen tip within approximately 5 mm (0. 20 inch) of the tablet surface and press each pen button in turn. All of the ExpressKeys should glow brightly each time a pen button is pressed C. While still within proximity, but without touching the tablet surface, move your pen across the active area of the tablet. The screen cursor should move in the corresponding direction on your monitor or display screen. When you are done, exit the diagnostics mode by pressing both the upper left and lower right ExpressKeys and holding them down for three (3) seconds. In the Pen Tablet control panel, select the TABLET tab and use the pull-down menus to return the ExpressKeys to their previous settings. A. Contents Index 35 Contents Index 36 4. Open the Pen Tablet control panel and select the TABLET tab. Click on the DEFAULT button to return to the tablet default settings. · Open a Microsoft Office or image file. [. . . ] The replaceable pen tip. Contents Index 56 Contents Index 57 Pen mode. A method of positioning the screen cursor. Wherever you place your Bamboo pen on the tablet, the screen cursor will jump to the same corresponding point on the screen. This is known as absolute positioning, and is the default setting for the Bamboo pen. [. . . ]