User manual WACOM BAMBOO FUN

[. . . ] Contents Index 1 User's manual for Windows & Macintosh ® ® Using a pen Customizing your pen Troubleshooting Using a tablet Customizing your tablet Digital inking Using a cordless mouse Customizing your cordless mouse Contents Index 1 Contents Index 2 BambooTM Fun User's Manual for Windows® & Macintosh® English version 1. 0, April 03, 2007 Copyright © Wacom Company, Limited, 2007 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. [. . . ] · Connect the tablet to a different USB port or try connecting to the USB port on another computer. · If the tablet status ring does not illuminate after your computer is on and has finished booting up, your USB port may be disabled. Verify that you have connected the tablet to an active USB port. First open the Pen Tablet control panel and select the TABLET tab. Use the pull-down menus to DISABLE all of the ExpressKeys. Now press both the upper left and lower right ExpressKeys and hold them down for three (3) seconds. · Check the ExpressKeys by pressing each one in turn. The tablet status ring should glow at a brighter level each time you press a key. · Check the Touch Ring by sliding your finger around it. The tablet status ring should glow at a brighter level when you touch the ring. · Check the pen by first opening the Pen Tablet control panel and selecting the PEN tab. Click on the DEFAULT button to return the pen to its default settings. Touch the pen tip and then the eraser to the tablet active area. The tablet status ring should glow brightly each time the tip or eraser makes contact with the tablet surface. Without applying pressure to the pen tip, hold the pen tip within approximately 5 mm (0. 20 inch) of the tablet surface and press each pen button in turn. The tablet status ring should glow brightly each time a pen button is pressed. While within proximity, but without touching the tablet surface, move your pen across the active area of the tablet. The screen cursor should move in the corresponding direction on your monitor or display screen. Contents Index 37 Contents Index 38 Check the cordless mouse by opening the Pen Tablet control panel and selecting the MOUSE tab. Click on the DEFAULT button to return the mouse to its default settings. Move the cordless mouse across the active area of the tablet; the screen cursor should move in the corresponding direction on your monitor. Test the buttons on your cordless mouse by clicking each button. The tablet status ring should glow brightly each time a button is pressed. [. . . ] Wherever you place your Bamboo Fun tool on the tablet, the screen cursor will jump to the same corresponding point on the screen. This is known as absolute positioning, and is the default setting for the Bamboo Fun pen. Also, PEN MODE allows you to quickly position the screen cursor without having to first find it and then move it across the desktop. The smallest unit of measure on your monitor screen. [. . . ]