User manual WACOM DTK-2100 INSTALLATION AND HARDWARE MANUAL

[. . . ] No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the right to change any specifications and product configurations at its discretion, without prior notice and without obligation to include such changes in this manual. [. . . ] The ROTATION value should change as you rotate the pen. When you are done, click on the CLOSE button to exit the dialog box. If you encounter problems with the display portion of your Cintiq, refer to the following tables; your problem may be described here and you can try the solution offered. For additional information about color issues, see the documentation that came with your operating system or applications. Verify that the light on the AC power adapter is on and the power cable is securely plugged into Cintiq's power receptacle. Check that the Cintiq power switch is turned on. Your computer may be in a power management mode. Touch the pen tip to the Cintiq display screen, move the mouse, or depress any key on your keyboard. Turn off both your computer and the pen display. check the video cable for bent or broken connector pins. Then properly connect the video cable and turn on the pen display and your computer. verify that the DVI/VGA switch is properly set. Restart your computer after changing the position of the switch. verify that the video card is properly installed. verify that the video cable is properly connected. Turn off both your computer and the Cintiq pen display. Check the video cable and any video adapters for bent or broken connector pins. Then properly reconnect the cables and turn on Cintiq and your computer. A `no signal go to power save' message appears briefly on your display screen. A `cable disconnect go to power save' message briefly appears on your display screen. When a still image is displayed for a long period of time without refreshing the screen, an afterimage remains for a short period of time. The input signal frequency is incorrectly set or not compatible with Cintiq. [. . . ] Move the equipment farther away from the television or radio. Plug the equipment and computer into an outlet that is on a different circuit from the television or radio. If necessary, consult your Wacom dealer or an experienced radio/television technician for help. Changes or modifications to this product not authorized by Wacom could void the FCC Certification and negate your authority to operate the product. [. . . ]