User manual WACOM PL-521

[. . . ] DTF521_Manual. fm Page -1 Tuesday, February 28, 2006 10:36 AM www. wacom. com Pen Display Installation & User's Guide for DTF-521/PL-521 series DTF521_Manual. fm Page 0 Tuesday, February 28, 2006 10:36 AM (This page intentionally left blank. ) DTF521_Manual. fm Page 1 Tuesday, February 28, 2006 10:36 AM INTRODUCTION AND OVERVIEW The DTF-521/PL-521 pen display combines the benefits of an LCD monitor with the control, comfort, and productivity of Wacom's cordless, battery-free pen technology. This gives you a direct pen-on-screen interface that can be used with a Personal Computer (PC) or Macintosh® computer. The basic components of the pen display include a Wacom pen tablet internally mounted behind a 15. 0" diagonal TFT color LCD monitor, and a cordless, battery-free Wacom pen. The DTF-521/PL-521 also comes equipped with a VGA pass-thru (ANALOG RGB OUT) port, enabling you to simultaneously connect a VGA monitor or projector to the pen display. [. . . ] Provides two options: Use AUTO ADJUST to reset only the image parameters. Use RECALL to reset all screen options to the factory default. Selecting the EXIT icon exits the RESET window without resetting anything. Customizing page 25 DTF521_Manual. fm Page 26 Tuesday, February 28, 2006 10:36 AM BACKLIGHT. Select to increase or decrease the backlight brightness level. LANGUAGE. Select to choose a language option for the OSD. COLOR. Provides color temperature settings for 9300°, 6500°, and 5000° Kelvin. DIRECT displays the received signal as it is without any adjustment. When DIRECT is selected, the BRIGHTNESS and CONTRAST settings are also set to DIRECT and cannot be adjusted manually. The USER option enables you to adjust Red, Blue, and Green independently. Choose a setting and press ENTER to activate your selection. Change the USER setting by selecting the ENTER icon. In the user adjustment COLOR window, change Red, Green, or Blue to calibrate color. icon Customizing page 26 DTF521_Manual. fm Page 27 Tuesday, February 28, 2006 10:36 AM Adjusting pitch and phase Some computers and video cards may not allow the auto-sync function to fully work when the DTF-521/PL-521 is first connected. If some portion of text appears blurred, adjust pitch and phase by following the procedure below. For crisp images, set the resolution of your video card to 1024 x 768. · · In the Pen Tablet control panel, select the CALIBRATE tab. If you are working with multiple displays, be sure the display corresponding to the DTF-521/PL-521 is selected in the MONITOR menu. button to activate the calibration screen. Using the OSD controls, open the OSD menu and select the PITCH icon. Then adjust the pitch level so that the pattern of fine vertical stripes displays evenly. (For details on changing the OSD settings, see Working with on screen display settings on page 24. ) In the OSD menu, select the PHASE icon. Adjust the phase level so that the adjustment pattern shows clearly. [. . . ] The purchase of this product from your dealer does not include Wacom's software and the associated rights of usage. Wacom grants you, the user, the right to use the software solely in accordance with the conditions of this software license agreement. By purchasing this product you agree to the terms of this license. Entitlement to Use the Software Wacom grants the customer a personal, non-exclusive license to use the software solely in combination with this product and for the proper operation of this product. This license may be transferred only in connection with this product. [. . . ]