User manual WACOM SD-311E

[. . . ] Acrobat® Reader Copyright © 1987-1996 Adobe Systems Incorporated. Adobe and Acrobat are trademarks of Adobe Systems Incorporated which may be registered in certain jurisdictions. Apple, the Apple logo, and Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, MS, Windows, Windows 95, Windows 98, and/or other Microsoft products are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] Move the UltraPen across the active area of the tablet; the screen cursor should move in the corresponding direction on your monitor. Test the UltraPen by pressing the pen tip against the surface of the tablet; the status LED on the tablet should change from orange to green. Contents Index HAVING TROUBLE?Now, without applying pressure to the pen tip, press the side switch; the status LED should again change from orange to green. Turn the pen over; the status LED should change from orange to green when the eraser enters proximity. If any of the above tests failed, you may have a defective pen or tablet. See Contacting technical support. MACINTOSH TROUBLESHOOTING If your PenPartner tablet is not working, see the sections below: Checking USB cable connection(s), Macintosh, Verifying your Macintosh is USB ready, Testing the hardware, Macintosh and Resolving software conflicts. Checking USB cable connection(s), Macintosh Make sure your computer is turned on, the operating system has finished loading, and PenPartner is properly connected to an active USB port. PenPartner's status LED will light whenever the tablet is connected to an active USB port and your computer has recognized it as a USB device. If the LED is off, try the following: · Make sure the USB cable is securely connected to a USB port. · If you are connecting the tablet to a USB hub (or hub device such as a monitor with USB ports), be sure the USB hub is properly connected to your computer and is active. If the tablet's status LED does not illuminate after your computer is on and has finished booting up, your USB port may be inactive. See Verifying your Macintosh is USB ready. Contents Index HAVING TROUBLE?Place a space before the name "Tablet Driver" in the Extensions folder. This causes the PenPartner driver to load earlier than other control panels. Restart your computer and watch for the WACOM tablet successful startup icon. If the PenPartner driver still does not load, locate the conflicting extension in the System Folder. · Go to the System Folder and create a new folder titled, "Disabled Extensions". Drag your thirdparty extensions to this new folder. If you see the WACOM tablet successful startup icon, you have a conflict with one of the extensions. If the PenPartner driver still does not load, drag your third-party extensions back to the Extensions folder and delete the Disabled Extensions folder. · Start moving the extensions, a few at a time, from the Disabled Extensions folder back into the Extensions folder. Restart your computer and watch for the successful startup icon until you find the conflicting extension. After you locate the conflicting extension, return the rest of your extensions to the Extensions folder. [. . . ] The drawing area of the tablet where the pen is detected. A WACOM feature that provides eraser support for some non-eraser aware applications. When you use the eraser to select text or objects in a supported application, and you lift the eraser off the tablet, the UltraPen will delete whatever is selected. A version of DOS that is not running under another operating system or called from another software application. [. . . ]