User manual WAVECOM WINPATS

[. . . ] REVISION 1. 87 +, MARCH 2000 1996 WAVECOM INSTRUMENTS PTY LTD Product Developed by Wavecom Instruments Pty Ltd 45 Charles St Norwood S. A. 5067 Ph 08 8331 8892 Fax 08 8331 3648 E-mail: admin@wavecom. com. au WEB PAGE www. wavecom. com. au 1 INDEX 1. INSTALLATION PROCEDURE OF WinPATSTM OPENING THE PROGRAM LOGIN THE MAIN PROCESSING SCREEN MENU INFORMATION EQUIPMENT MENU COMMUNICATION MENU REPORTS REGISTRY SORT ADMINISRATION HELP THE RCD SCREEN SCANNER / SMART WAND OPTION ERROR MESSAGES Getting Started Handy tips · Tab Key takes you to the next sequential data entry field. · Use mouse to go any where you want to. · A menu name with a underscore letter can be called using Alt+letter underscored e. g. [. . . ] SAVE settings, this allows for by passing the above procedure next time you plug in your tester. 7. 2 Get From Pat - Click on Get From Pat or Press Alt + G This function allows you to enter the DOWN LOAD screen. Here is where connecting to the testing units is seen. Down loading of test, results and entering of new equipment can be entered here. Fig 19. This screen has the following features: The down load Grid: This grid contains the following information about every test downloaded from the Pats tester Unit. The sequence no: Sequence number of test. This is simply a counter used by this program for range updating. This flag is used when the current record has been through the update process. These numbers are automatically generated by the Pats Unit. 14 NRNo register flag. This flag is used by the operator when user wants the current test recorded to the history but does not want to show in any reports or to affect other data because of processing. This flag signifies that the current test is an intermediate test i. e. a test done before the due date, however record in the history details and does not affect any other data because of processing. Part number as inputted to the Pats Unit from the operator. Results as recorded by the Pats Unit Status 1-18. Status's as recorded by the Pats Unit for every Result Result. This is a computer generated result status. As inputted by the operator of the Pats Unit at time of test. Can be MANual or TEST or AUTO, as set by the operator of the Pats Unit at time of testing. User Identification number, as set by the operator at time of testing. The Serial number from the TESTER is required by the program to maintain traceability of test results. Is required by the program to do Updating. This option allows the user to nominate a range of tests to be updated. This is useful when tests have been done across a number of sites. The user wishes to nominate say tests 1-25 to be updated for one particular site he enters 1 in the From box to 25 in the To box, then proceeds to select the site where the items belongs. [. . . ] (If Option Fitted) This option is only visible via the EQUIPMENT TYPE Table. If you have bought this, option an Equipment type RCD1P can be seen on the list. This option allows the user to enter test results from their manual test methods required for RCD devices. These tests include Trip times, Button tests, Half-Current trip test etc. Input to the RCD screen is done when the user clicks on the ADD TEST Button on the HISTORY Tab of an Item with a type code prefixed with RCD**. [. . . ]