User manual WAVES APA44

[. . . ] Alternatively, you can mount a single APA44-M or two units in a standard 19" studio rack-mount using the APA44-M Rackmount Adapter Kit (not supplied) which can be obtained through your Waves dealer. If you intend to use the Rackmount Adapter Kit, do not attach the rubber feet to the APA44-M unit, or detach them if you already have. 1. Introduction Welcome to the APA44-M manual. Be sure to read the safety considerations on page 1 of this manual before you plug-in and switch on the APA44-M's power. [. . . ] Operation Once the APA44-M unit is connected to power and to the network, simply press the power button on the front panel to switch the unit on. The power LED will illuminate to indicate that the unit is operating. The APA44-M is now ready to communicate with your host computer. To switch the APA44-M unit off, press and hold the power button on the front panel for approximately 4 seconds. The power LED should switch off to indicate that the unit is off. Before switching the APA44-M off, make sure that the Waves software is not running on it (as explained in the software manual). 6 4. Troubleshooting Please verify the following points before trying to use the Waves software on the APA44-M unit: 1. The DC power cable is properly connected to the APA44-M. The AC power cable is properly connected to the power adapter and to the mains. The power adapter's green LED is on. A crossed network cable is connected between the APA44-M and the host computer ­ in the case of connecting a single APA44-M directly to the host computer. A standard network cable is connected between the APA44-M and an Ethernet switch. The switch is connected with a standard network cable to the host computer ­ in the case of connecting several APA44-M units to the host computer. The APA44-M is switched on (by pressing the power button at the front) and the power LED is illuminating. In case it is necessary to restart the APA44-M unit, press and hold the power button for a few seconds to switch the unit off, and then press it again to switch the unit on. 7 Contact Waves Sales and technical support Before calling Waves for technical support, please first check the Waves website (http://www. waves. com) for technical support issues and the latest information. Contacting the tech-support or the sales department via our website is preferred, and is more efficient in terms of being able to provide you with complete documentation and solutions. Suite 100 Knoxville, TN 37917 Tel: 1-865-909-9200 Fax: 1-865-909-9245 Rest of the world Waves Audio Ltd. Azrieli Center 3 The Triangle Tower, 32nd Floor Tel-Aviv 67023, Israel Tel: 972-3-608-4000 Fax: 972-3-608-4056 http://www. waves. com ©2005, Waves. All features and specifications subject to change without notice. 8 5. Technical Specifications Dimensions: Width: 221mm / 8. 75 inch Height: 44. 5mm / 1. 75 inch Depth: 188mm / 7. 4 inch Weight: 2kg / 4. 4 pounds Power Adapter: Input Voltage: 100~240 VAC, Auto Sensing Frequency: 50~60 Hz Input Current: 1. 2 A @ 115 VAC, 0. 6 A @ 230 VAC Output Current: 12 VDC, 5 A, 60W Environmental: Operating Temperature: 10~40°C 9 6. Warranty One Year limited Warranty on APA44-M Hardware ("Product"): Waves Audio Ltd. ("Waves") warrants that the Product conforms substantially to the specifications contained in the Product documentation for a period of one (1) year from the date of original purchase from Waves or its authorized resellers. [. . . ] WAVES MAKES NO OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. PURCHASER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT AS SPECIFIED HEREIN. IN NO EVENT WILL WAVES BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE PRODUCT, INCLUDING LOST PROFITS, DAMAGE TO PROPERTY AND, TO THE EXTENT PERMITTED BY LAW, DAMAGE FOR PERSONAL INJURY, EVEN IF WAVES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow the exclusion of implied warranties or limitations on the duration of an implied warranty, so the above limitations may not apply to you. [. . . ]