User manual WAYTEQ X820 VERSION 1.0

[. . . ] GPS satellite signals cannot pass through solid materials (except glass). When you are inside a tunnel or building, GPS position is not available. A minimum of 4 GPS satellite signals are needed to determine current location. [. . . ] This USB cable will work on the PC either with Microsoft Active Sync® or as a mess storage media. You can select the mode in the "Setting-USB" menu. 1. 4 Install the Car Cradle and Bracket Take off the protection film on the bottom of the suction. Then put the bracket onto a suitable location of your windscreen or side window and make sure the suction or windscreen is clean without water or any dirty things . Never place the stand where the driver's field of vision is blocked. Install the device bracket into the car cradle, after adjust of the angle and direction of the PND, rotate the screw to lock onto windscreen. 1. 5 AC-DC Charger optional Main Functions Introduction 1. Starting Up and Power Off Long press the "Power" button to power the equipment on and you can see the main interface as below : Long press the "Power" button again to enter into the below interface : Tap the "Power off" button to turn the unit off. Tap the "Sleep" button to enter a suspend state and the system stops operation. Tap the "Cancel" button to turn back to the screen. 2. GPS Navigation Double tap the "GPS" icon to start navigation program. 3. Media Tap the icon "Media" on the main menu and enter into the below interface : 3. 1 Music Tap the icon "Music" on the media menu and enter into the following interface . A. Return to the Media menu B. Volume control C. Select desired music file D. Equalizer Double tap icon " " to choose music file . Tap the icon " delete , tap the icon " " for single selection , tap the icon " " " to select all , tap the icon " " for single to delete all . 3. 2 Photo Tap the "Photo" icon on the media menu and tap the icon " the following interface . " to select photo files , double tap the photo file to see A. C. Return to the Media menu Slide mode B. Previous 3. 3 E-book Tap the "EBook" icon on the media menu , then tap the " enter into the following interface . " icon to choose Ebook files , double tap the file and A. [. . . ] GPS Info Tap the "GPS Info" icon and the unit will show the detail information of GPS satellites. 7. Setting Tap the icon "Setting" on the main menu and enter into the following interface . Tips : after make any changes of setting , tap " " to save the change . 7. 1 Volume Tap the icon "Music" on the media menu and enter into the following interface . Choose " Music " files to be background sound when unit is power on . 7. 2 Backlight Tap the "Backlight" icon and enter into the following interface . Tap "Left-side" or "Right-side" button to select the duration of automatically powering off the backlight. 7. 3 Language Tap the "Language" icon and choose the language . 7. 4 Date and Time Tap the icon "Date Time" and enter into the following interface to set date , time and time zone . 7. 5 Calibration Tap the " Calibration " icon and enter into the following interface . Tap the icon "OK" to adjust the touch screen. 7. 6 Factory Reset Tap the " Factory Reset " icon and enter into the following interface . Tap the icon " OK " to load factory default setting . 7. 7 System Info Tap the "Sys Info" icon and enter into the following display interface . 7. 8 USB Tap the icon "USB" to set the USB working mode . 7. 9 Nav Path Tap the "Nav Path" icon and enter into the following display interface . When you have several Navigation maps in the device, if you choose the "Navigation" icon , you can set up one of Navigation maps ( navigation program files ) , and select the Auto Run Navigation , next time when tapping the "GPS" icon on the main menu, the device will run the selected Navigation software automatically . [. . . ]