User manual WEED EATER EBV215

[. . . ] ENGLISH R Trademark Please do not return product to retailer. Por favor, no devuelva el producto al lugar de compra. Veuillez ne pas retourner le produit au détaillant. 1-800-554-6723 Register your product online at: Registre su producto en línea en: Enregistrez votre produit en ligne à l'adresse : www. weedeater. com Instruction Manual Manual de Instrucciones Manuel d'Instructions EBV 215 FOR HOUSEHOLD USE ONLY PARA USO CASERO SOLAMENTE POUR UTILISATION À DES FINS DOMESTIQUES SEULEMENT WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Failure to do so can result in serious injury. [. . . ] S Always use the collection bag shoulder strap when vacuuming to avoid loss of control. S Check air intake openings, elbow tube, and vacuum tubes frequently, always with the unit stopped and the power source disconnected. Keep vents and tubes free of debris which can accumulate and restrict proper air flow. Do not use with any opening blocked, Keep free of dust, lint, hair and anything that may reduce air flow. Turn the inlet restrictor counterclockwise and remove it from the unit. You will next attach the vacuum tubes. Vacuum Inlet Cover To attach blower tube: 1. Align the grooves on the blower tube with the grooves on the blower outlet. Push the blower tube onto the blower outlet until it snaps into place (tube is secured by red tube release button). To remove the blower tube, press the tube release button while pulling on tube. Tube Release Button Blower Tube Blower outlet Inlet Restrictor VACUUM ASSEMBLY NOTE: Assembly instructions for using your unit as a blower are explained in the previous section. If you have already assembled your unit for use as a blower, remove the blower tube. Remove the inlet restrictor An inlet restrictor is used when using your unit as a blower. This restrictor is not used during vacuum use and must be removed during assembly for vacuum use. NOTE: Be sure to keep the inlet restrictor for using your unit as a blower. Ensure unit is stopped and extension cord is unplugged. Open the inlet cover by inserting the tip of a screwdriver into the latch area on the blower unit. Gently tilt handle Attaching the vacuum tubes There are 2 vacuum tubes, an upper tube and a lower tube. The upper tube has a vacuum assist handle attached to one end and is cut straight on both ends. The upper tube attaches to the blower unit. The lower tube has an angled end that you point toward the ground during vacuum use. The lower tube attaches to the upper tube. Ensure unit is stopped and extension cord is unplugged. While holding inlet cover open, place the hooks of the vacuum assist handle on the retaining posts of the unit. [. . . ] S Allow motor to cool before storing or transporting. Position unit so that any sharp object cannot accidentally cause injury. S Store unit unplugged, well out of the reach of children. SEASONAL STORAGE Prepare unit for storage at the end of the season or if it will not be used for 30 days or more. [. . . ]