User manual WEIDER 8507

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual WEIDER 8507. We hope that this WEIDER 8507 user guide will be useful to you.

Lastmanuals help download the user guide WEIDER 8507.

Download

Manual abstract: user guide WEIDER 8507

Detailed instructions for use are in the User's Guide.

 [. . . ] WESY85070 Serial No. 
Write the serial number in the space above for future reference. 

Serial Number Decal (Under Seat)

QUESTIONS?
As a manufacturer,  we are committed to providing complete customer satisfaction. If you have questions,  or if there are missing or damaged parts,  we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS,  PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our customer hot line will provide immediate assistance,  free of charge to you.  [. . . ] Attach the Handle with a 5/16 x 2 1/4 Bolt (33),  two 5/16 Flat Washers (8),  a 1/2 x 3/8 Spacer (51) and a 5/16 Nylon Locknut (3). Attach a 7 Handle (47) to the other Arm (46) in the same manner. 13

46 3 46 8 49 45 45 47

47

49 8

51

33

8

14. Attach a Large U Bracket (56) to one of the Arms (46) with a 3/8 x 2 3/4 Bolt (70),  3/8 Flat Washer (9),  and 3/8 Nylon Locknut (21). Be sure that the Swivel Bracket (58) is on the inside as shown. Do not overtighten the 3/8 Nylon Locknut. Attach a Large U Bracket (56) to the other Arm (46) in the same manner. 

14 58 21 56 21 46 9 56 9 70 46 70

15. IMPORTANT: As you assemble the Long Cable (66) and the Short Cable (23),  refer to the CABLE DIAGRAMS on page 22 of this manual to make sure that the Cables are properly routed. Find the end of the Long Cable (66) that does not have a rubber ball. Insert that end of the Long Cable up through the indicated opening in the Top Frame (67). Lay the Long Cable (66) over a 4 1/2 Pulley (81). Attach the Pulley inside the Top Frame (67) with a 3/8 x 2 3/4 Bolt (70),  two 3/8 Flat Washers (9),  the two 1/2 x 1/2 Spacers (65),  and a 3/8 Nylon Locknut (21). 

15 81 65 21 9 70 9 67 66

23

9

16. Remove the 3/8 x 1 3/4 Bolt (48),  3/8 Nylon Jam Nut (5),  and 3 1/2 Pulley (15) from the indicated bracket on the Top Frame (67). Insert the end of the Long Cable (66) through the bracket and down through the indicated hole. Re-attach the 3 1/2 Pulley (15) to the bracket on the Top Frame (67) with the 3/8 x 1 3/4 Bolt (48) and 3/8 Nylon Jam Nut (5). Be sure that the Long Cable is between the Pulley and the top of the bracket. 

16 67 Hole

5

15 66

48

17. Wrap the Long Cable (66) around the V Pulley (76). Attach the Pulley and a Large Cable Trap (82) to the welded bracket on the Top Frame (67) with a 3/8 x 2 1/4 Bolt (50) and 3/8 Nylon Jam Nut (5). Attach the 5/16 x 3 1/2 Bolt (87),  two 5/16 Flat Washers (8),  the 1 Metal Spacer (22),  and a 5/16 Nylon Locknut (3) to the Front Upright as shown. Wrap the Short Cable (23) around a 3 1/2 Pulley (15). Attach the Pulley to the Front Upright (42) with a 3/8 x 3 1/2 Bolt (16),  a 3/8 Washer (9),  and a 3/8 Nylon Jam Nut (5). Be sure that the Short Cable is between the Pulley and the Metal Spacer. 

23 16

15 42

87 8

9 5 3 8 23

22

24.  [. . . ] The numbers show the routing of each cable. Long Cable (66) Short Cable (23)

2

4

Top Frame 8

High Pulley 1

2

5

3 7

6 Weight Stack1

Low Pulley3

22

3/4" Round Inner Cap (34) 1" Round Inner Cap (49) 1" Round Cover Cap (55)

5/16" x 2" Eyebolt (62)

1 1/4" Square Inner Cap (57)

1 1/2" Square Inner Cap (32) 1 3/4" Square Inner Cap (44)

2" Square Inner Cap (27) 2" Square Outer Cap (88)

1/4" Nylon Locknut (7) 1/4" x 1/2" Screw (31) 1/4" x 3/4" Screw (18)

1/4" Nylon Jam Nut (86) 1/4" x 2" Screw (20) 5/16" Jam Nut (2)

1/4" x 2 1/2" Screw (43) 5/16" Nylon Locknut (3)

5/16" x 1 1/2" Bolt (24) 3/8" Nylon Jam Nut (5)

5/16" x 2" Bolt (61) 3/8" Nylon Locknut (21)

5/16" x 2 1/4" Bolt (33) 1/4" Flat Washer (10)

3/8" x 1 3/4" Bolt (48) 5/16" Flat Washer (8)

3/8" x 2 1/4" Bolt (50)

3/8" Flat Washer (9) 1/4" x 2" Carriage Bolt (38)

5/16" x 2 1/2" Carriage Bolt (1)

1/2" x 3/8" Spacer (51)

5/16" x 2 3/4" Carriage Bolt (14) 1/2" x 1/2" Spacer (65)

5/16" x 2 3/4" Bolt (11)

1/2" x 3/4" Spacer (73)

3/8" x 2 3/4" Bolt (70)

1" Metal Spacer (22) 5/16" x 3" Bolt (17)

5/16" x 3 1/4" Bolt (35)

1" Plastic Stop (64)

5/16" x 3 1/2" Bolt (87)

3/8" x 3 1/2" Bolt (16)

1" Retainer (54)

5/16" x 6" Bolt (74)

ORDERING REPLACEMENT PARTS
To order replacement parts,  simply call our Customer Service Department toll-free at 1-800-999-3756,  Monday through Friday,  6 a. m. To help us assist you,  please be prepared to give the following information: 1. The MODEL NUMBER of the product (WESY85070).  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WEIDER 8507

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual WEIDER 8507 will begin.