User manual WELLTECH FXSO GATEWAY H.323 3701A

[. . . ] FXSO GATEWAY User Manual (3701A/02A) Notice © Copyright 2002 Welltech Computer Co. , Ltd. All intellectual property rights in this publication are owned by Welltech Computer Co. , Ltd. and are protected by Republic of China copyright laws, other applicable copyright laws and international treaty provisions. retains all rights not expressly granted. [. . . ] (see figure 3. 27) Figure 3. 27: ROM Upgrade for FTP Copyright (c) 2002 Welltech Computer Co. Ltd. 66 FXSO H. 323 Gateway User Manual Document Ver. : 2. 2 Release Mar. , 2004 2 Key in the IP address, the login name, password of your FTP server and the correct file name, file type. (see figure 3. 28) Figure 3. 28: FTP information 3 Press the OK button to start the upgrade procedure. Updating the firmware by the TFTP server 1 Downloading the TFTP program from our web site and install it first. Executing the TFTP program before you want to use the TFTP upgrade method. 2 Pick up the "Rom Upgrade" button to enter the upgrading web page and switch to the TFTP method. (see figure 3. 29) Copyright (c) 2002 Welltech Computer Co. Ltd. 67 FXSO H. 323 Gateway User Manual Document Ver. : 2. 2 Release Mar. , 2004 Figure 3. 29: ROM Upgrade for TFTP 3 Key in the IP address of your TFTP server, pick up the file type for your upgrade file and the correct file name for upgrading. (see figure 3. 30) Figure 3. 30: TFTP information 4 Press the OK button to start the upgrade procedure. Copyright (c) 2002 Welltech Computer Co. Ltd. 68 FXSO H. 323 Gateway User Manual Document Ver. : 2. 2 Release Mar. , 2004 3. 20 Flash Clean Users could make all the configurations back to the default setting by this button. The password of the account and the networking configuration couldn't be back to the default setting by this command. (see figure 3. 31) Copyright (c) 2002 Welltech Computer Co. Ltd. 69 FXSO H. 323 Gateway User Manual Document Ver. : 2. 2 Release Mar. , 2004 Figure 3. 31: Flash Clean 3. 21 Commit This web page could save the configurations if users change some configurations. This is necessary for users change the configurations. (see figure 3. 32) Copyright (c) 2002 Welltech Computer Co. Ltd. 70 FXSO H. 323 Gateway User Manual Document Ver. : 2. 2 Release Mar. , 2004 Figure 3. 32: Commit 3. 22 Reboot System This web page will restart the whole system. This is the necessary step for the changing the configurations and makes it executed. (see figure 3. 33) Copyright (c) 2002 Welltech Computer Co. Ltd. 71 FXSO H. 323 Gateway User Manual Document Ver. : 2. 2 Release Mar. , 2004 Figure 3. 33: Reboot System 4. Command List Copyright (c) 2002 Welltech Computer Co. Ltd. 72 FXSO H. 323 Gateway User Manual Document Ver. : 2. 2 Release Mar. , 2004 4. 1 Hyper Terminal Setting A terminal emulator is needed when using RS-232 port to configure Gateway. There are kinds of terminal emulator software. Here, we use Microsoft HyperTerminal to depict how to set up terminal emulator: 1 Execute the Hyper Terminal program, and then the following windows will pop-up on the screen. (START ­ Program files ­ Accessories ­ Communication ­ Hyper Terminal) Figure 4. 1: Hyper Terminal 2 Define a name such as `wg37' for this new connection. Copyright (c) 2002 Welltech Computer Co. [. . . ] Ltd. 114 FXSO H. 323 Gateway User Manual Document Ver. : 2. 2 Release Mar. , 2004 usr/config$ ddns The dynamic DNS service information and configuration Usage: ddns [-print] ddns [-enable 0/1] ddns [-serve Address] [-hostname Name] [-id ID] [-passwd Password] [-checkip option] [-checkipsrv Address] [-delay time] [-force IP] Display Dynamic DNS information and configuration. 1:Enabled/0:Disable the dynamic DNS service. 1:Enabled/0:Disable check the host current IP address. -checkipsrv1 Specify IP address check server. [. . . ]