User manual WELLTECH SIP PHONE LP101

[. . . ] SIP-Phone User Manual Chapter 1 Overview of the SIP-Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. Front View and Keypad function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. Back View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Phone Book Search: enable/disable phone book search function. If user enabled this function, SIP-Phone will search dialed number in phone book to see if there is any matched table before send to Proxy server, and if there is a matched data in phone book, SIP-Phone will make call to related IP address. If user ID contains alphabets, user can set it as prefix 29 - SIP SIP-Phone Administration Guide - - string here. For example, if Account Name is 123, SIP-Phone will sent out messages as Account Name @"IP address of Proxy", if user set prefix as abc, SIP-Phone will set out as abc123@"IP address of Proxy". This function is for special proxy server. Line Number: identify one number for the SIP-Phone to register to the Proxy. Line Account: set user name of SIP-Phone for registering. User can set user name and password for registering. If password is no need, please set user name the same as line number or SIP-Phone won't register successfully. Line Password: set password for registering. RTP Port: set RTP port for sending voice data. Expire: set expire time of registration. SIP-Phone will keep re-registering to proxy server before expire timed out 30 SIP SIP-Phone Administration Guide 3. System Configuration Please refer to chapter 4. 12 [sysconf] command - - Keypad DTMF Type: set DTMF type. User can select DTMF type SIP-Phone transmits. RFC2833 Payload Type: change RFC2833 Payload type. This is for special request from the other site, if RFC2833 payload types of 2 sites are different, it may cause some problem of connection. Inter Digit Time: Set the DTMF inter digit time (second) To set the duration (in second) of two pressed digits in dial mode as timed out. If after the duration user hasn't pressed next number, SIP-Phone will dial out all number pressed. End of Dial Digit: select end of dialing key, e. g. set end of dial key as * button, after finished pressing dialing number then press * will dial out. - 31 SIP SIP-Phone Administration Guide 4. PPPoE Configure Please refer to chapter 4. 11[pppoe] command - User Name: Set PPPoE authentication User Name. [. . . ] Web Management 1. From LCD Phone Menu Please choose the 6 2 selection-Firmware Upgrade. Press OK to enter into the sub-selection as below. Firmware Update (1) Download method There are two methods to download new version file, please move the ">" symbol by press or on the keypad to select TFTP or FTP method, then press OK to confirm it. (2) FTP/TFTP Sever User has to offer one TFTP/FTP server IP Address and set this IP Address via keypad. [. . . ]