User manual WESTERN DIGITAL MY BOOK WORLD EDITION

[. . . ] Single and Dual-drive Remote Access Storage Systems TM TM My Book World Edition User Manual Table of Contents 1 Introduction . . 1 My Book World Edition in Your Network--The Basics . 3 Recording Your WD Product Information . 4 My Book World Edition Front and Rear View . [. . . ] For WD Anywhere Access, click the Forgot username and password link in the sign in screen (see "Signing In" on page 13) and follow the instructions as prompted. Q: Why does the interface report "failed drive" even after the bad drive is already replaced?A: The system detects the new drive in the device as failed until the new drive is formatted. Refer to "Format New Internal Drive" on page 43 for instructions. TROUBLESHOOTING ­ 22 MY BOOK WORLD EDITION USER MANUAL Q: My router, hub, or switch has failed or is not available. How do I access my data in the My Book World Edition?Connect the My Book World Edition directly to the computer's Ethernet port. 2. To connect to a shared folder on the My Book World Edition, right-click on the My Network Places or Network Neighborhood icon on the desktop, then click Map Network Drive. . . Type in the name of the My Book World Edition shared folder (e. g. , \\mybook world\public). TROUBLESHOOTING ­ 23 MY BOOK WORLD EDITION USER MANUAL Q: How do I connect a USB external drive to the device?Connect and power on the USB external drive. Connect one end of the USB cable to the external drive. Connect the other end of the USB cable to the available USB port on the My Book World Edition. 4. My Book automatically detects the external USB drive. Information about the USB drive is displayed under System Summary in the Shared Storage Manager. See "Safely Remove the Device" on page 43 for instructions on how to safely remove the external drive. TROUBLESHOOTING ­ 24 MY BOOK WORLD EDITION USER MANUAL 9 Appendix A - Shared Storage Manager CAUTION: Shared Storage Manager is a web interface for configuring My World Book Edition and is recommended only for advanced users. Shared Storage Manager is a LAN access only application used for configurating this product as well as managing local files and data. For most users, WD Anywhere Access is the recommended application for sharing files. Accessing Shared Storage Manager WD Anywhere Access Installed 1. Open your browser and enter the Storage Device Name you selected in section 5. The Shared Storage Manager screen appears, displaying the device name, firmware version, drive status, and user name in the upper right corner. The System Summary box in the right section of the screen displays storage (internal and external drives) and network information. 3. The Enter Network Password screen will appear when you click on any of the configuration tabs. Enter the user name and password you created in section 5 of this manual, then click OK. APPENDIX A - SHARED STORAGE MANAGER ­ 25 MY BOOK WORLD EDITION USER MANUAL Shared Storage Manager Setup (WD Anywhere Access Not Installed) 1. Open your browser and enter `mybookworld' in the Address field. [. . . ] This limited warranty period shall commence on the purchase date appearing on your purchase receipt. WD shall have no liability for any Product returned if WD determines that the Product was stolen from WD or that the asserted defect a) is not present, b) cannot reasonably be rectified because of damage occurring before WD receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing or obliterating labels and opening or removing external enclosures, unless the product is on the list of limited user-serviceable products and the specific alteration is within the scope of the applicable instructions, as found at support. wdc. com), accident or mishandling while in the possession of someone other than WD. Subject to the limitations specified above, your sole and exclusive warranty shall be, during the period of warranty specified above and at WD's option, the repair or replacement of the Product. The foregoing warranty of WD shall extend to repaired or replaced Products for the balance of the applicable period of the original warranty or ninety (90) days from the date of shipment of a repaired or replaced Product, whichever is longer. [. . . ]