User manual WHIRLPOOL ACM 849/BA

[. . . ] Köcheln Schmelzen 6th Sense Funktion Sechster Sinn Wasser kochen Flexi cook DE12 GARTABELLE Lebensmittel kategorien Gerichte oder Gararten Leistungsstufe und Garverlauf Erste Phase Leistungsstufen Booster - 9 Booster - 9 Booster - 9 7-8 Booster - 9 9 7-8 7-8 7-8 7-8 7-8 7-8 7-8 7-8 7-8 8-9 6 6 Booster - 9 6 6-7 6-7 5-6 4-5 4-5 5-6 Zweite Phase Teigwaren kochen und am Kochen halten Teigwaren kochen und am Kochen halten Teigwaren kochen und am Kochen halten Garen In Wasser kochen Frittieren Garen Garen Anbräunen von Saucengemüse Garen Grillen von beiden Seiten Garen Garen Garen Garen Frittieren Garen Garen Garen Garen Garen Garen Zum Köcheln bringen Am Köcheln halten Am Köcheln halten Garen Leistungsstufen 7-8 7-8 5-6 4-5 6-7 8-9 6-7 3-4 7-8 3-4 7-8 4-5 3-4 7-8 3-4 7-8 6-7 5-6 5-6 5-6 3-4 3-4 3-4 4-5 2-3 2-3 Frische Teigwaren Getrocknete Teigwaren Gekochter Reis Risotto Gekocht Frittiert Gemüse, Hülsenfrüchte Geschwenkt Geschmort Angebraten Braten Fleisch Gegrillt Andünsten Schmorgerichte Gegrillt Fisch Schmorgerichte Frittiert Gemüseomelettes Eier Omelette Wachsweich/hart Pfannkuchen Tomaten Saucen Hackfleischsauce Béchamelsauce Konditorcreme Süßspeisen, Cremes Pudding Milchreis Wasser erhitzen Wasser erhitzen Wasser erhitzen Andünsten und Anrösten Wasser erhitzen Öl erhitzen Zubehörteil erhitzen Zubehörteil erhitzen Zubehörteil erhitzen Anbräunen von Fleisch in Öl (in Butter Leistungsstufe 6) Erhitzen der Pfanne Andünsten in Öl (in Butter Leistungsstufe 6) Andünsten in Öl (in Butter Leistungsstufe 6) Erhitzen der Pfanne Andünsten in Öl (in Butter Leistungsstufe 6) Öl oder Frittierfett erhitzen Erhitzen der Pfanne mit Butter oder Bratfett Erhitzen der Pfanne mit Butter oder Bratfett Wasser erhitzen Erhitzen der Pfanne mit Butter Andünsten in Öl (in Butter Leistungsstufe 6) Andünsten in Öl (in Butter Leistungsstufe 6) Zubereiten der Saucengrundlage (Butter zergehen lassen und Mehl darin auflösen) Milch zum Kochen bringen Milch zum Kochen bringen Milch erhitzen Teigwaren, Reis DE13 ENGLISH Installation Page 2 Instructions for use Page IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT This manual and the appliance itself provide important safety messages, to be read and always observed. This is the danger symbol, regarding safety, warning of potential risks to users and others. All safety messages will be preceded by the danger symbol and the following words: DANGER WARNING Indicates a hazardous situation which, if not avoided, will result in serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. [. . . ] To resume cooking, press the key again . Flexi cook This function allows you to use the cooking area as two separate cooking zones or as an extra-large single zone. It is perfect for oval, rectangular and elongated pans (with maximum base dimensions of 38x18 cm) or more than one standard pan. In order to activate the flexicook function, switch on the hob and press the button : the two cooking zone displays show level “5”; both dots next to the level number are lit, indicating that the Flexi cook is activated. To change the power level, move your finger along the slide touchscreen: the number inside the circle will change with just a quick slide of the finger from a minimum of 1 to a maximum of 9. To deactivate the flexible zone function, press the key : the cooking zones revert to operating singly again. To switch the cooking zone off, press OFF The message “no pot” will appear on the display of the zone that is not able to detect any pot (because of missing pot, or misplaced or not suitable for induction hob). This message remains active for 60 seconds: in this time you can add or slide pots within the flexicook area as you prefer. After 60 seconds if no pan is placed on the zone, the system stops “searching” pots on that zone, the symbol disabled. Remains visible on the display to remind that the zone is i To reactivate the Flexicook function on both heaters, press the button . The Flexi cook function is also able to detect when a pot is moved from one zone to the other one within the flexi cook area keeping the same power level of the zone where the pan originally was placed (see the example in the figure below: if the pot is moved from the front heater to the rear heater, the power level will be shown on the display corresponding to the zone where the pot is placed). It is also possible to operate the Flexi cook area as two independent cooking zones, using the corresponding button of the single zone. Place the pot in the center of the single zone and adjust the power level with the slide touchscreen. I Important: make sure to place the pans centered on the cooking zone in the way to cover the logo placed in the center of the single cooking zone. In case of big pot, oval, rectangular and elongated pans make sure to place the pans centered on the cooking zone covering both Examples of good pot placement and bad pot placement : GB18 i When the flexi cook function is selected, the booster and sixth sense functions cannot be used. If the timer is set, it will be displayed alongside the hotplate display at the top. description of automatic functions The hob features automatic functions for each cooking zone. The symbols of the available functions are shown next to the selection key of each cooking zone. Every time an automatic function is selected, an indicator light turns on next to the symbol and the letter “A” appears in the cooking zone display. Sixth Sense The Sixth Sense function automatically selects the ideal power setting for bringing water to the boil and signals when boiling point is reached. After positioning the pot of water, switch on the hob and select the desired cooking zone. Press the key: “A” appears on the display and the indicator light turns on. [. . . ] For å slå av Meldingen “ingen gryte” vil vises på displayet for sonen som ikke kan registrere en gryte (på grunn av manglende eller feilplassert gryte, eller fordi gryten ikke passer til induksjonplatetopper). Fortsetter å lyse på displayet for å minne i Trykk på knappen for å gjenaktivere funksjonen for fleksibel tilberedning på begge varmesonene. Ved siden av velgertasten for hver av sonene vises symbolene for de funksjonene som er tilgjengelige. Hvis det er behov for noen form for reparasjon, må du kontakte et autorisert servicesenter (for å være sikker på at det benyttes originale reservedeler og at reparasjonen utføres korrekt). [. . . ]