User manual WHIRLPOOL ADG 6340 IX PRODUCT FICHE

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual WHIRLPOOL ADG 6340 IX. We hope that this WHIRLPOOL ADG 6340 IX user guide will be useful to you.

Lastmanuals help download the user guide WHIRLPOOL ADG 6340 IX.


WHIRLPOOL ADG 6340 IX PRODUCT FICHE: Download the complete user guide (52 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL ADG 6340 IX INSTALLATIE (1816 ko)
   WHIRLPOOL ADG 6340 IX INSTALLTAION (1816 ko)
   WHIRLPOOL ADG 6340 IX INSTALACIÓN (1816 ko)
   WHIRLPOOL ADG 6340 IX INSTALLATION (1816 ko)
   WHIRLPOOL ADG 6340 IX PROGRAM CHART (407 ko)
   WHIRLPOOL ADG 6340 IX KURZANLEITUNG (191 ko)
   WHIRLPOOL ADG 6340 IX INSTALLAZIONE (1816 ko)
   WHIRLPOOL ADG 6340 IX INSTRUCTION FOR USE (209 ko)
   WHIRLPOOL ADG 6340 IX GUIDE D'INSTALLATION (1816 ko)
   WHIRLPOOL ADG 6340 IX AUFSTELLUNGSANLEITUNG (1816 ko)

Manual abstract: user guide WHIRLPOOL ADG 6340 IXPRODUCT FICHE

Detailed instructions for use are in the User's Guide.

[. . . ] Programme recommended when using detergents of type A (non enzyme-based detergents). 5019 100 91226 (We reserve the right to make technical modifications) How to use the dishwasher 1. After loading the dishwasher, close the door properly and open the water supply tap. The dishwasher switches on automatically as soon as the programme selector knob is turned. [. . . ] Note: Once the Start button has been pressed, the dishwasher memorises the last programme selected. This information remains in the memory even during interruption of the power supply. To change the selected programme, press the Start button for about 5 seconds. Select a new programme using the programme selector knob and press the Start button. Note: If the dishwasher is switched off during a wash programme, when switched on again it will resume the wash cycle from where it was interrupted. Only open the dishwasher door if strictly necessary during a wash cycle and exercise maximum caution. To indicate the end of the programme, the Start indicator lamp switches off and the End indicator lamp (if fitted) lights up (for about 30 min. ). Turn the programme selector knob to the “0” position to switch off the dishwasher (only after the Start indicator lamp has switched off). • • • Upper and lower rack To lower: pull out the two side handles and gently lower the rack. Marked crockery: • Is the water hardness level selector not properly adjusted?See (“Filling the salt container” in the user instructions). (See “Filling the salt container” in the user instructions). (See “Filling the detergent dispenser” in the user instructions). (See “Filling the rinse aid dispenser” in the user instructions). Note: With some models, when the Start button is pressed a pre-wash cycle precedes the actual wash programme; This regenerates the water softening system. • AFTER-SALES SERVICE If after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the water supply tap, then call our After-Sales Service (see guarantee). • The service code (the number after the word Service on the adhesive rating plate) inside the door on the right-hand side. • • • Important • • Fill the detergent dispenser and check the salt and rinse aid level. Do not use the appliance for items not suitable for washing in a dishwasher, for example: wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. If a fault occurs or you wish to change the current programme, press the “START” button for about 5 seconds until the Start indicator lamp switches off. [. . . ] If a fault occurs or you wish to change the current programme, press the “START” button for about 5 seconds until the Start indicator lamp switches off. If regeneration salt is to be added, immediately start a wash programme in order to eliminate any residual salt (rinsing alone is not sufficient). Sometimes, even though the regeneration salt container has been filled, the corresponding indicator lamp (if fitted) will light up during the first wash cycle after filling with salt. • • • • If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem: The dishwasher is not working: • Is the plug properly inserted in the wall socket? [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL ADG 6340 IX

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL ADG 6340 IX will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag