User manual WHIRLPOOL ADP 4502/5/S INSTRUCTION FOR USE

[. . . ] If using combined action dishwasher tabs, follow the user instructions!Electric indicator on control panel (if provided). How to fill the detergent dispenser A B C Check the rinse aid level Check the regeneration salt level On models with water softener system only. Electric indicator on control panel (if provided). Load the racks Close the dishwasher door, turn on the water tap Select a programme Refer to the dishwasher loading instructions. The last programme selected will light up. Select the desired programme (using the specific button or knob). [. . . ] When the upper rack is in place the retainers must always be closed. Retainer closed Retainer open F F Lower rack: Depending on the model with fixed or tilting plate holders (G). Half Load: Load the lower rack (see description of Options). Greater washing power, particularly for plates and saucepans. Cutlery basket (J) or (H): Some models are provided with a grid (I) that can be fitted onto the cutlery basket to keep items separated. Cutlery basket (D), if provided, for appliances with half load only. Sharp knives and forks that might cause injury must be placed in the cutlery basket with the sharp end facing downwards. Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in a dishwasher, for example wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. Spare parts which are sold separately: 1) Multi-purpose support (A) - N. WGH 1000 series. What to do if. . . If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem (* see also the corresponding chapter in the user instructions). Problem The appliance is not working Cause • No water supply. • The appliance does not load sufficient water. • Open the tap. Remedy • Clean the water supply tap filter. • Ensure there are no kinks in the water hose. • • • • Insert the plug into the mains socket. Check the domestic circuit fuse. • Starting the selected programme. • The programme can be set to “0” to start. • Arrange crockery so that items do not touch each other. • Follow recommended detergent dosage. • Select a more intense wash cycle. • The spray arms must be able to turn freely. • Remove any impurities obstructing the water flow *. If crockery is not perfectly dry If crockery is not perfectly clean • Insufficient rinse aid. • The water jet does not reach the crockery. • Spray arm nozzles clogged. • Incorrect detergent/detergent too old. • Use a good quality detergent. Sandy or grainy residues • Clogged filters. • Filters incorrectly assembled. • Check filters regularly/if necessary clean *. [. . . ] • The service code (the number indicated on the adhesive rating plate) inside the door on the right-hand side. Before using the dishwasher, read the user instructions! ADP 4502/5 Quick Reference Guide GB Indicators Programme selector knob Add regeneration salt Only add regeneration salt immediately before starting a wash programme. Add rinse aid ON / OFF button Start button Switches “on” when the dishwasher is operating. Switches off at the end of the programme. Programme chart Programmes Loading instructions Detergent 2) A X X X Consumption 3) Litres kWh Minutes B X X Pre-Rinse Quickwash Eco-Normal Normal Intensive 1) 2) cold 40°C 1) Crockery to be washed later. Lightly soiled crockery with no dried-on food. Recommended programme for heavily soiled crockery, especially suitable for pans and saucepans. 3) 5. 0 13. 0 19. 0 16. 0 0. 02 0. 70 1. 05 1. 65 10 30 170 100 50°C 65°C 70°C X X 17. 0 1. 90 135 Reference programme for energy label in compliance with EN 50242 regulations. [. . . ]