User manual WHIRLPOOL AGB 449/WP INSTRUCTION FOR USE

[. . . ] Fit the legs to the appliance; the appliance must be levelled using a spirit level. Slight irregularities can be levelled by adjusting the feet themselves. With table models, make sure that the base chosen is capable of supporting the weight of the appliance. The main switch or plug should be located in the vicinity of the appliance and easy of access. [. . . ] dards must be adhered to: - Install a cut-off valve for each supply on the line before the appliance. - Local accident prevention standards - Make connections according to regulations currently in force. - Current CEI standards. Warning! The manufacturers cannot be held responsible for any damage due to inadequate or incorrect installation. Under such circumstances the guarantee will be considered null and void. 027- 03 - Electric pasta cooker 5 USING THE APPLIANCE products to clean the floor under the equipment or nearby, as fumes or any drops may produce similar destructive effects on the steel. Only rub in the direction of the satin finish. Rinse thoroughly with clean water and dry carefully. Never use running water, as this could infiltrate into the inIgnition Check that the water drain release is closed. Turn on the main switch For an easier tank cleaning it is possible to overturn laterally the heating element. Switch on the on/off switch: the warning light comes on Food stains and encrusted food particles: showing that the appliance is live. AGB 451/WP and AGB 058/WP has 2 tanks and wash with hot water before they harden. Should food particles have already become hard, use water and soap or 2 separates controls. chlorine-free detergents, if necessary using a wooden The switch has 3 working position: spatula or fine stainless steel wool: rinse and dry thorPOS. 7. 5/9/15) Scale encrustations: scale deposits on the bottom of tanks, pans, etc. 2 = Cooking (2/3 power, kW 5/3+3/5+5) be removed using descaling products on the market and POS. 1 = Keeping warm (1/3 power, kW following the relative instructions. Scratches: To turn the appliance off, simply turn the knob back to '0'. should the surfaces become scratched, they must be smoothed using extra fine stainless steel wool or abrasive sponges made of fibrous synthetic material, rubbing in the *N. B: Power of 2. 5, 1, 5+1, 5 and 2, 5+2, 5 kW (Switch in position 1 direction of the satin finish. = keeping warm) is for connection at 400 V/3N. [. . . ] A on the adhesive label featuring the technical specifications applied on the actual product (the label also giving the serial number). What to do if not using the appliance for a long time Thoroughly clean and dry the machine as described. This symbol indicates that the product is classified, accorDisconnect the power supply. ding to the regulations in force, as an item of electrical and electronic equipment and conforms to EU Directive What to do if something goes wrong 2002/96/EC (WEEE) meaning that, at the end of its service If anything goes wrong, immediately turn the appliance life, it must be treated separately from domestic waste, i. e. off, then turn off the power supply at the switch located it must be handed in free of charge to a separate waste upstream of the appliance, and call the aftersales depart- electrical and electronic equipment collection centre or rement. [. . . ]